41 open source boards using the 74LVC1G08
Real designs built with the 74LVC1G08, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Elec RPI Robot HAT
pollen-robotics
65 × 30.9 mm122 parts4LApache-2.0108MSI001
ATmega8
99 × 69 mm168 parts2LMIT25ESP8266
MG ZS V2
damienmaguire
180 × 120 mm161 parts4LGPL-3.016HPM5E31 ECatDualFOC
LX050724
85 × 113 mm559 parts4LMIT14Raspberry Pi
Owl driver board-16
geezacoleman
234.4 × 56 mm445 parts4LMIT14MicroZed carrier board
viktor-nikolov
124.5 × 135.4 mm76 parts6LCC0-1.07STM32
Elec Anything2EtherCAT
pollen-robotics
60 × 70.3 mm200 parts4LApache-2.04Pi1MHzLevelShifter
kgl2001
26.9 × 50.8 mm34 parts2LCC-BY-SA-4.04Panasonic wv cm2080-rgb mux
pcm720
50.5 × 17.5 mm38 parts2LCERN-OHL-W-2.03TANDY 200 Dual RAM
bkw777
36.1 × 25.7 mm5 parts2LCustom license3ESP32
Dough133
chl33
69.9 × 44.5 mm59 parts4LMIT2Huhhhh I didnt save
ethanjamesauto
229.9 × 93.3 mm365 parts2LNo license1AP2100-power proto
imagestream
150 × 160 mm340 parts6LMIT1- schematic only · 64 parts
FS-TUS-2026
Othello-Von-Ryan-9000
64 partsNo license1 - schematic only · 64 partsSTM32
Rf mixed signal security game
jackpham-rgb
64 partsMIT1 Indieduck
armature-ai-labs
65 × 30.9 mm125 parts4LApache-2.00Microduck project
Ngalalalekhaaa
65 × 30.9 mm122 parts4LNo license0RP2040/RP2350
Better lamp controller
super-cow-powers
90 × 60 mm95 parts4LBSD-3-Clause0BinauralMic
LeftistTachyon
49.2 × 47.4 mm57 parts2LNo license0- schematic only · 199 parts
Hardware underwater
GabrielFMartinez
199 partsNo license0 Raspberry Pi
Panel-16
geezacoleman
250.4 × 131 mm445 parts4LMIT14TANDY 200 Dual RAM tsop
bkw777
36.1 × 25.5 mm5 parts2LCustom license3ESP32
Led button
GeniePod
90 × 90 mm116 parts2LCERN-OHL-S-2.02Processor attempt 1
ethanjamesauto
229.9 × 93.3 mm365 parts2LNo license1Power ManagementV2
valex2
111 × 110.5 mm129 parts2LNo license1Power ManagementV2
ryos17
111 × 110.5 mm129 parts2LNo license1Atlas dock charger
md-sazzad-eee
90 × 66 mm119 parts2LNo license0BinauralMic old
LeftistTachyon
45 × 34.2 mm56 parts4LNo license0VGA
John-Lluch
150 × 80 mm107 parts4LNo license10Cft ctl
alexiosc
131.9 × 164.6 mm195 parts4LGPL-3.06MicroDeflect
tullulah
100 × 100 mm94 parts2LGPL-3.03Processor attempt 3
ethanjamesauto
229.9 × 93.3 mm365 parts2LNo license1PIC
FOXSI-4 Formatter/Plenum board
foxsi
116.8 × 59.7 mm133 parts4LNo license1ESP32
Atlas agent ctrl
md-sazzad-eee
110 × 90 mm100 parts2LNo license0Cft ctl dip
alexiosc
131.9 × 164.6 mm195 parts4LGPL-3.06Processor attempt 4
ethanjamesauto
229.9 × 83.8 mm291 parts2LNo license1
How designs wire the 74LVC1G08
Read from the KiCad layouts of 27 open source designs, one per repository: what each pin of the 74LVC1G08 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 16 of 27 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCpin 5 | Connected to: 3.3V 93% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Elec RPI Robot HAT by pollen-robotics, MSI001 by ATmega8, MG ZS V2 by damienmaguire and Owl driver board-16 by geezacoleman.
The 74LVC1G08 in open source designs
The gallery holds 41 open source boards using the 74LVC1G08 from 30 GitHub repositories; a typical one measures about 99.5 × 81.9 mm and carries around 122 components.
55% are two-layer designs, the rest use four layers or more, and 46% carry an open source license.
The most starred is Elec RPI Robot HAT by pollen-robotics.
Parts used alongside the 74LVC1G08
Microcontrollers on boards using the 74LVC1G08
What boards using the 74LVC1G08 are built for
74LVC1G08: common questions
Where can I find a 74LVC1G08 reference design?
Each of the 41 boards on this page is a real design using the 74LVC1G08. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LVC1G08 VCC pin?
The VCC pin has a decoupling capacitor on 16 of 27 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 27 open source designs using the 74LVC1G08.
What parts are used alongside the 74LVC1G08?
The SN74LVC1G125DBV, AP63205, SN74LVC1G126DBVR, 74LVC1G04 and 74LVC1G86 appear in the most repositories here.
Which microcontrollers do boards using the 74LVC1G08 use?
Most are built on ESP32 (3), Raspberry Pi (2), STM32 (2) and ESP8266 (1).
How big is a typical board using the 74LVC1G08?
The median is 99.5 × 81.9 mm, and 55% are two-layer designs.
What is the most popular open source board using the 74LVC1G08?
By GitHub stars, Elec RPI Robot HAT by pollen-robotics, with 108 stars.
Can I simulate one of these boards using the 74LVC1G08 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.