Display
About the Display PCB
Display is an open source PCB design by jackw01, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 39 × 46 mm, with 10 components from 7 distinct parts.
Other key parts include the APX803-31SAG-7. By type, the board carries 5 resistors, 2 connectors, 1 IC, 1 transistor and 1 capacitor.
It belongs with the retro computing and power & battery designs in this gallery.
From the project
Open source raspberry pi handheld retro gaming console
Pi Tin is an open source retro gaming device designed around the Raspberry Pi Zero 2 W and a 2.8" 320x240 TFT display, the largest readily available size that will fit into an Altoids tin. The Pi Zero 2 W is capable of emulating most SNES, GBA, PS1, Genesis/Megadrive, and even some N64 games.
Pi Tin's gamepad uses the exact same Alps tactile switches and elastomer membrane design used in the Gameboy Advance SP and DSi to achieve superior button feel over designs using conductive rubber buttons or bare tactile switches. It features a soft power button to turn on or safely shut down the system…
Main components on the Display
Display bill of materials (BOM)
10 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | APX803-31SAG-7 APX803-31SAG | SOT-23 | U101 |
| 1 | CJ3134KW | SOT-323_SC-70 | Q101 |
| 1 | FPC09-Q1.0-8AH2.0 | XYECONN_FPC09-Q1.0-8AH2.0 | J102 |
| 1 | AFC07-S50ECA-00 | Jushuo_AFC07-S50ECA-00 | J103 |
| 1 | CL21B106KPQNNNE 10u | C_0805_2012Metric | C101 |
| 4 | 0603WAF100JT5E 10 | R_0603_1608Metric | R101, R102, R103, R105 |
| 1 | 0603WAF1002T5E 10k | R_0603_1608Metric | R104 |
Display design files
The KiCad project lives in the jackw01/pi-tin repository on GitHub; these links point at the commit this page was built from.
Display: common questions
How big is the Display PCB?
The Display measures 39 × 46 mm, has 2 copper layers and is 0.6 mm thick.
How many components are on the Display?
10 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Display design files?
From the jackw01/pi-tin repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Display design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which jackw01 chose for the repository.
More boards in pi-tin
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k