Midi-Keypad-V2
jacobgkhuynh-stack·Midi-Keypad-V2·PCB_Kicad/MidiKeypadV2.kicad_pcb
About the Midi-Keypad-V2 PCB
Midi-Keypad-V2 is an open source ESP32 PCB design by jacobgkhuynh-stack, published on GitHub. It is a 2-layer board measuring 99 × 46.5 mm, with 5 components from 3 distinct parts.
Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 3 switches, 1 IC and 1 connector.
It belongs with the audio designs in this gallery.
From the project
Woah, it's the Midi Keypad (https://github.com/KaiPereira/MIDI-Keypad) but instead with 3 EC11 rotary encoders and 7 capacitive keys to reduce costs and make some sound!
So, I made this project for week 3 of Half Life by Hack Club and with it being the "DESIGN YOUR INSTRUMENT" week I followed the starter project guide "MIDI Keypad" and modified it to make it mine. Here's the BoM |Item |Qty|Supplier |Cost/item|Total Cost|link |…
Main components on the Midi-Keypad-V2
Midi-Keypad-V2 bill of materials (BOM)
5 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Waveshare ESP32-S3-ZERO | Waveshare ESP32-S3-Zero | U1 |
| 1 | Capacitive Touch Buttons | Capacitive Keys | J1 |
| 3 | RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1, SW2, SW3 |
Midi-Keypad-V2 design files
The KiCad project lives in the jacobgkhuynh-stack/Midi-Keypad-V2 repository on GitHub; these links point at the commit this page was built from.
Midi-Keypad-V2: common questions
What microcontroller does the Midi-Keypad-V2 use?
The Midi-Keypad-V2 is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.
How big is the Midi-Keypad-V2 PCB?
The Midi-Keypad-V2 measures 99 × 46.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Midi-Keypad-V2?
5 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Midi-Keypad-V2 design files?
From the jacobgkhuynh-stack/Midi-Keypad-V2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Midi-Keypad-V2 design in my own project?
The repository has no license, so all rights stay with jacobgkhuynh-stack. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Midi-Keypad-V2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k