Modular Drawers
Jaimee007·Modular_Drawers·Hardware/devboard_ch32v003/devboard_ch32v003.kicad_pcb
About the Modular Drawers PCB
Modular Drawers is an open source RISC-V PCB design by Jaimee007, published on GitHub. It is a 2-layer board measuring 37 × 21 mm, with 16 components from 13 distinct parts.
Its main chip is the CH32V003F4P6, from the RISC-V family. Other key parts include the XC6206P332MR. By type, the board carries 5 capacitors, 4 connectors, 2 ICs, 2 diodes, 2 resistors and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Cajonera modular inteligente impresa en 3D. Cada cajón lleva su propio microcontrolador (CH32V003), un LED RGBW y un final de carrera. Los cajones se unen con cola de milano y se conectan entre sí con cable plano IDC. Un ESP32-C3 en el módulo base detecta la posición de cada cajó
Cajonera modular inteligente impresa en 3D. Cada cajón lleva su propio microcontrolador (CH32V003), un LED RGBW y un final de carrera. Los cajones se unen con cola de milano y se conectan entre sí con cable plano IDC. Un ESP32-C3 en el módulo base detecta la posición de cada cajón y lo integra con Home Assistant, para encender el cajón donde está lo que buscas.
Main components on the Modular Drawers
Modular Drawers bill of materials (BOM)
16 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH32V003F4P6 | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | XC6206P332MR | SOT-23-3 | U2 |
| 1 | PORT_1-10 | PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | PORT_11-20 | PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | PROG | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | PWR_5V | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | RESET | SW_PUSH_6mm | SW1 |
| 1 | GREEN | LED_0603_1608Metric | D1 |
| 1 | RED | LED_0603_1608Metric | D2 |
| 2 | 100nF | C_0603_1608Metric | C1, C5 |
| 1 | 10uF | C_0805_2012Metric | C2 |
| 2 | 1uF | C_0603_1608Metric | C3, C4 |
| 2 | 1k | R_0603_1608Metric | R1, R2 |
Modular Drawers design files
The KiCad project lives in the Jaimee007/Modular_Drawers repository on GitHub; these links point at the commit this page was built from.
Modular Drawers: common questions
What microcontroller does the Modular Drawers use?
The Modular Drawers is built around the CH32V003F4P6, from the RISC-V family.
How big is the Modular Drawers PCB?
The Modular Drawers measures 37 × 21 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Modular Drawers?
16 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Modular Drawers design files?
From the Jaimee007/Modular_Drawers repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Modular Drawers design in my own project?
The repository has no license, so all rights stay with Jaimee007. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Modular Drawers without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105