Jpod
Jake-Eshelman-Portfolio·jpod·hardware/KiCAD/jpod-v1.0/jpod-v1.0.kicad_pcb
About the Jpod PCB
Jpod is an open source ESP32 PCB design by Jake-Eshelman-Portfolio, published on GitHub. It is a 2-layer board measuring 56.5 × 70.5 mm, with 10 components from 3 distinct parts.
Its main chip is the ESP32-WROVER-E-N16R8, from the ESP32 family. By type, the board carries 5 switches, 4 resistors and 1 IC.
It belongs with the audio, iot & wireless and power & battery designs in this gallery.
From the project
2. Identify the removable USB disk by model and capacity. Use the whole-disk path (for example, /dev/sde), not a partition path such as /dev/sde1. The script erases the whole selected disk and creates one MBR/FAT32 partition; Linux sees the USB reader and cannot prove what media
2. Identify the removable USB disk by model and capacity. Use the whole-disk path (for example, /dev/sde), not a partition path such as /dev/sde1. The script erases the whole selected disk and creates one MBR/FAT32 partition; Linux sees the USB reader and cannot prove what media is inserted. 3. Ensure mp3samples/` contains at least one MP3, then run from the repository root, substituting the verified disk path:
Main components on the Jpod
Jpod bill of materials (BOM)
10 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROVER-E-N16R8 | ESP32-WROVER-E_EXP | U1 |
| 5 | TL3342F160QG_TR | SW_TL3342F160QG_TR | SW1, SW2, SW3, SW4, SW5 |
| 4 | 10K | R_0603_1608Metric | R1, R2, R3, R4 |
Jpod design files
The KiCad project lives in the Jake-Eshelman-Portfolio/jpod repository on GitHub; these links point at the commit this page was built from.
Jpod: common questions
What microcontroller does the Jpod use?
The Jpod is built around the ESP32-WROVER-E-N16R8, from the ESP32 family.
How big is the Jpod PCB?
The Jpod measures 56.5 × 70.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Jpod?
10 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Jpod design files?
From the Jake-Eshelman-Portfolio/jpod repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Jpod design in my own project?
The repository has no license, so all rights stay with Jake-Eshelman-Portfolio. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Jpod without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k