Plytka MCP
jaku2019·ETH32·MCP_exp_brd/plytka_MCP.kicad_pcb
About the Plytka MCP PCB
Plytka MCP is an open source PCB design by jaku2019, published on GitHub. It is a 2-layer board measuring 33 × 46.6 mm, with 13 components from 6 distinct parts.
Other key parts include the MCP23017_SP and ULN2803A. By type, the board carries 4 ICs, 4 capacitors, 3 resistors, 1 connector and 1 switch.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
semi-plc based on ESP32 and Supla
ESP is connected with IO by MCP23017. One of this modules was placed on a card that is a bit loose. You shouldn't play with it when ETH32 is on, as it could make the relays stop working. Repositioning it to 90 degrees should solve the problem.
The PCB is designed to fit perfectly in the Kradex ZD1012 enclosure for DIN rail. ## The code In the software example relays no. 101-116 have assigned inputs with relative numbers.

Main components on the Plytka MCP
Plytka MCP bill of materials (BOM)
13 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP23017_SP | DIP-28_W7.62mm_Socket | U1 |
| 3 | ULN2803A | SOIC-18W_7.5x11.6mm_P1.27mm | U2, U3, U4 |
| 1 | Conn_02x13_Odd_Even | PinHeader_2x13_P2.00mm_Horizontal | J1 |
| 1 | SW_DIP_x03 | SW_DIP_SPSTx03_Slide_KingTek_DSHP03TS_W7.62mm_P1.27mm | SW1 |
| 4 | 100nF | C_0603_1608Metric | C1, C2, C3, C4 |
| 3 | 10k | R_0603_1608Metric | R1, R2, R3 |
Plytka MCP design files
The KiCad project lives in the jaku2019/ETH32 repository on GitHub; these links point at the commit this page was built from.
Plytka MCP: common questions
How big is the Plytka MCP PCB?
The Plytka MCP measures 33 × 46.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Plytka MCP?
13 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Plytka MCP design files?
From the jaku2019/ETH32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Plytka MCP design in my own project?
The repository has no license, so all rights stay with jaku2019. Use it as a reference, and ask the author before reusing the design.
More boards in ETH32
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k