Supla ESP32 LAN
jaku2019·ETH32·pcb_v3/pcb_v3.kicad_pcb
About the Supla ESP32 LAN PCB
Supla ESP32 LAN is an open source ESP32 PCB design by jaku2019, published on GitHub. It is a 2-layer board measuring 209 × 85.5 mm, with 211 components from 31 distinct parts.
Its main chip is the ESP32_38pin, from the ESP32 family. Other key parts include the LM2596T-5, LTV-814, MCP23017_SP, DS3231M and MCP9808_MSOP. By type, the board carries 68 resistors, 42 connectors, 25 capacitors, 23 ICs, 21 diodes and 18 relays.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
semi-plc based on ESP32 and Supla
ESP is connected with IO by MCP23017. One of this modules was placed on a card that is a bit loose. You shouldn't play with it when ETH32 is on, as it could make the relays stop working. Repositioning it to 90 degrees should solve the problem.
The PCB is designed to fit perfectly in the Kradex ZD1012 enclosure for DIN rail. ## The code In the software example relays no. 101-116 have assigned inputs with relative numbers.

Main components on the Supla ESP32 LAN
Supla ESP32 LAN bill of materials (BOM)
211 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM2596T-5 | TO-263-5_TabPin3 | U1 |
| 17 | LTV-814 | DIP-4_W7.62mm | U2, U3, U4, U5, U6, U7, U8, U9 +9 |
| 1 | MCP23017_SP | DIP-28_W7.62mm_Socket | U14 |
| 1 | ESP32_38pin | ESP32_38pin | U20 |
| 1 | DS3231M | SOIC-16W_7.5x10.3mm_P1.27mm | U21 |
| 1 | MCP9808_MSOP | MSOP-8_3x3mm_P0.65mm | U22 |
| 1 | MB85RC256V | SSOP-8_3.9x5.05mm_P1.27mm | U23 |
| 36 | Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J1, J2, J5, J6, J7, J8, J9, J10 +28 |
| 1 | Conn_02x13_Odd_Even | PinSocket_2x13_P2.00mm_Vertical_SMD | J29 |
| 1 | Conn_01x08_Female | PinSocket_1x08_P2.54mm_Vertical | J42 |
| 1 | Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | J50 |
| 1 | PinHeader_2x07_P2.54mm_Vertical_SMD | PinHeader_2x07_P2.54mm_Vertical_SMD | J56 |
| 2 | Conn_01x02_Male | PinSocket_1x02_P2.54mm_Vertical | J59, J60 |
| 1 | Battery | Battery_Panasonic_CR1220-VCN_Vertical_CircularHoles | BT1 |
| 7 | SolderJumper_2_Open | PinHeader_2x01_P2.54mm_Vertical | JP1, JP2, JP3, JP4, JP5, JP6, JP7 |
| 18 | HF46F/12V | HF46F | K1, K2, K3, K4, K5, K6, K7, K8 +10 |
| 1 | YAAJ_DCDC_StepDown_LM2596 | YAAJ_DCDC_StepDown_LM2596 | REF8 |
| 3 | SW_DIP_x03 | SW_DIP_SPSTx03_Slide_KingTek_DSHP03TS_W7.62mm_P1.27mm | SW1, SW2, SW3 |
| 1 | SW_Push (TEST) | SW_PUSH_6mm_H5mm | SW4 |
| 20 | D_Photo | LED_0603_1608Metric | D1, D2, D3, D5, D6, D7, D8, D9 +12 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1N5824 | D_DO-201AD_P3.81mm_Vertical_AnodeUp | D4 |
| 1 | 33μH | L_12x12mm_H8mm | L1 |
| 1 | C_Polarized 680μF | CP_Elec_10x10.5 | C1 |
| 1 | C_Polarized 220μF | CP_Elec_8x10 | C2 |
| 22 | 100nF | C_0603_1608Metric | C3, C4, C5, C6, C7, C8, C9, C10 +14 |
| 1 | 10nF | C_0402_1005Metric | C25 |
| 19 | 2k | R_0603_1608Metric | R1, R2, R3, R5, R6, R11, R12, R17 +11 |
| 1 | 600k | R_0603_1608Metric | R4 |
| 17 | 47k | R_2512_6332Metric | R7, R8, R9, R10, R13, R14, R15, R16 +9 |
| 27 | 10k | R_0603_1608Metric | R23, R24, R25, R39, R40, R41, R44, R45 +19 |
| 4 | 4,7k | R_0603_1608Metric | R42, R43, R66, R67 |
Supla ESP32 LAN design files
The KiCad project lives in the jaku2019/ETH32 repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb_v3/pcb_v3.kicad_pcb
- Schematicpcb_v3/pcb_v3.kicad_sch
Supla ESP32 LAN: common questions
What microcontroller does the Supla ESP32 LAN use?
The Supla ESP32 LAN is built around the ESP32_38pin, from the ESP32 family.
How big is the Supla ESP32 LAN PCB?
The Supla ESP32 LAN measures 209 × 85.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Supla ESP32 LAN?
211 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the Supla ESP32 LAN design files?
From the jaku2019/ETH32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Supla ESP32 LAN design in my own project?
The repository has no license, so all rights stay with jaku2019. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Supla ESP32 LAN without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in ETH32
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k