ULTRATERM
About the ULTRATERM PCB
ULTRATERM is an open source PCB design by jamdotjar, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 68 × 65.6 mm, with 13 components from 11 distinct parts.
Other key parts include the LM809. By type, the board carries 5 connectors, 4 switches, 2 ICs, 1 LED and 1 resistor.
It belongs with the iot & wireless and audio designs in this gallery.
From the project
A portable bluetooth music player based on ULTRAKILL
ULTRATERM is a miniature replica of an ULTRAKILL settings terminal ( like the one used in cybergrind ), that acts as a bluetooth audio player.
The terminal sits at around 125mm tall, with a 57x104mm footprint. It was designed to look cool, be fairly accurate, and act as a (mostly) stand alone device. It features a: - 2.8" TFT display - Touchscreen + 3 physical buttons - A 2000mAh battery - Bluetooth headphone support - USB-C storage interface - Removable SD card storage ( and a custom microSD card adapter ) The case is designed to be entirely 3D printable, and assembled without adhesive or…
Main components on the ULTRATERM
ULTRATERM bill of materials (BOM)
13 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM809 | SOT-23 | U2 |
| 1 | ~ | TINYPICO | U3 |
| 1 | ILI9341 | PinHeader_1x14_P2.54mm_Vertical | J1 |
| 1 | Battery_plug | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 1 | SD_Card_Receptacle | AMPHENOL_10067847-001RLF | J3 |
| 1 | SD_Card_Device | SD_Card_Device_16mm_SlotDepth | J4 |
| 1 | Micro_SD_Card | microSD_HC_Hirose_DM3D-SF | J5 |
| 3 | SW_Push | SW_PUSH_6mm | SW1, SW2, SW3 |
| 1 | SW_SPST | SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW4 |
| 1 | LED_5MM_RGB_KCOM_RKGB LED_5mm_RGB_Kcom_RKGB | LED_D5.0mm-4_RGB_Wide_Pins | LED1 |
| 1 | 33OHM 33ohm | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
ULTRATERM design files
The KiCad project lives in the jamdotjar/ULTRATERM repository on GitHub; these links point at the commit this page was built from.
ULTRATERM: common questions
How big is the ULTRATERM PCB?
The ULTRATERM measures 68 × 65.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ULTRATERM?
13 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ULTRATERM design files?
From the jamdotjar/ULTRATERM repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ULTRATERM design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which jamdotjar chose for the repository.
More boards in ULTRATERM
Similar boards
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
OtterCastAudioV2
Ottercast
50 × 49.3 mm216 parts4LMIT665
ESP32
Chrismettal
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446
ESP32
66.4 × 48.1 mm7 parts2LCC-BY-SA-4.0446
ESP32
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446
Connecting piece
66.4 × 24.5 mm20 parts2LCC-BY-SA-4.0446