Rfsoc bxb fe eic hw
jamead·rfsoc-bxb-fe-eic-hw
About the Rfsoc bxb fe eic hw PCB
Rfsoc bxb fe eic hw is an open source PCB design by jamead, published on GitHub. It is a 6-layer board measuring 76.2 × 76.2 mm, with 34 components from 21 distinct parts.
Other key parts include the TPS7A4700xRGW, PE43713B-Z, ADL5611ARKZ-R7, XLF-172H+ and RPS-2-30+. By type, the board carries 16 capacitors, 7 ICs, 5 connectors, 5 resistors and 1 inductor.
It belongs with the audio designs in this gallery.
From the project
Front End amplifier / Filter PCB for EIC testing.
Analog front-end (AFE) board for the NSLS-II Fill Pattern Monitor.
The board accepts a broadband RF signal and produces two simultaneous 50-ohm outputs:
- Low-gain output: a direct, filtered monitor of the input signal. - High-gain output: a filtered and amplified signal with digitally programmable attenuation.
The two outputs provide sufficient dynamic range to observe both large and small signals without changing the input connection. The programmable attenuator in the high-gain path allows its level to be adjusted for the acquisition system while reducing the risk of amplifier or ADC…

Main components on the Rfsoc bxb fe eic hw
Rfsoc bxb fe eic hw bill of materials (BOM)
34 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS7A4700xRGW | Texas_RGW0020A_VQFN-20-1EP_5x5mm_P0.65mm_EP3.15x3.15mm_ThermalVias | U1 |
| 1 | PE43713B-Z | QFN32_5X5_PSM | U2 |
| 1 | ADL5611ARKZ-R7 ADL5611 | RK_3_ADI | U3 |
| 2 | XLF-172H+ | QFN24_XLF-13H&plus__MNC | U4, U5 |
| 1 | RPS-2-30+ | TT1413_MNC | U7 |
| 1 | RCAT-01+ | RCAT_LZ1737 | U8 |
| 1 | 39301022 | MOLEX_39301022 | J1 |
| 3 | TMB-V5F2-3LC | TMB-V5F2-3LC_PCBWay1_GCPW | J2, J3, J5 |
| 1 | 0878311420 878311420 | CONN14_878311420_MOL | J4 |
| 1 | 0603LS-471XJLC 43nH | IND_0S-471XJLC_COC | L2 |
| 1 | 68p | C_0603_1608Metric | C1 |
| 1 | 1.2n | C_0603_1608Metric | C2 |
| 1 | 1.0u | C_0603_1608Metric | C3 |
| 6 | 0.1u | C_0603_1608Metric | C4, C6, C7, C8, C9, C11 |
| 1 | 0.01u | C_0603_1608Metric | C10 |
| 4 | 10u | C_1206_3216Metric | C12, C13, C16, C17 |
| 1 | 47u | C_1206_3216Metric | C14 |
| 1 | 1u | C_1206_3216Metric | C18 |
| 1 | 5.11K | R_0603_1608Metric | R1 |
| 1 | 10K | R_0603_1608Metric | R2 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 22 | R_0603_1608Metric | R5, R6, R7 |
Rfsoc bxb fe eic hw design files
The KiCad project lives in the jamead/rfsoc-bxb-fe-eic-hw repository on GitHub; these links point at the commit this page was built from.
- Layoutfpm_afe.kicad_pcb
- Schematicfpm_afe.kicad_sch
Rfsoc bxb fe eic hw: common questions
How big is the Rfsoc bxb fe eic hw PCB?
The Rfsoc bxb fe eic hw measures 76.2 × 76.2 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Rfsoc bxb fe eic hw?
34 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rfsoc bxb fe eic hw design files?
From the jamead/rfsoc-bxb-fe-eic-hw repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Rfsoc bxb fe eic hw design in my own project?
The repository has no license, so all rights stay with jamead. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687