5 open source boards using the ADL5611ARKZ-R7
Real designs built with the ADL5611ARKZ-R7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
MurPhySDR
MillePoels
89 × 65 mm216 parts8LGPL-3.0144ch-RF-FE
JohnnyGOX17
249.9 × 94.7 mm275 parts4LMIT5Fpm hw afe
jamead
76.2 × 76.2 mm34 parts6LNo license0Rfsoc bxb fe eic hw
jamead
76.2 × 76.2 mm34 parts6LNo license0Iq mod
gallicchio
100 × 100 mm186 parts4LCERN-OHL-P-2.00
How designs wire the ADL5611ARKZ-R7
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ADL5611ARKZ-R7 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a series capacitor on 5 of 5 designs, most often 100 nF (then 100 pF).
- Pin 3 has a inductor on 5 of 5 designs, most often 43 nH.
- Pin 3 has a series capacitor on 5 of 5 designs, most often 100 nF (then 100 pF).
- The G pin is tied to GND on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 100% |
|
| Gpin 2 | Connected to: GND 100% | — |
| Pin 3 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MurPhySDR by MillePoels, 4ch-RF-FE by JohnnyGOX17, Iq mod by gallicchio and Fpm hw afe by jamead.
The ADL5611ARKZ-R7 in open source designs
The gallery holds 5 open source boards using the ADL5611ARKZ-R7 from 5 GitHub repositories; a typical one measures about 89 × 76.2 mm and carries around 186 components.
100% use four copper layers or more, and 60% carry an open source license.
The most starred is MurPhySDR by MillePoels.
Parts used alongside the ADL5611ARKZ-R7
Microcontrollers on boards using the ADL5611ARKZ-R7
What boards using the ADL5611ARKZ-R7 are built for
ADL5611ARKZ-R7: common questions
Where can I find a ADL5611ARKZ-R7 reference design?
Each of the 5 boards on this page is a real design using the ADL5611ARKZ-R7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ADL5611ARKZ-R7 pin 1 connected?
Pin 1 has a series capacitor on 5 of 5 designs, most often 100 nF (then 100 pF). Counted from the KiCad layouts of 5 open source designs using the ADL5611ARKZ-R7.
How is the ADL5611ARKZ-R7 pin 3 connected?
Pin 3 has a inductor on 5 of 5 designs, most often 43 nH. Counted from the KiCad layouts of 5 open source designs using the ADL5611ARKZ-R7.
How is the ADL5611ARKZ-R7 G pin connected?
The G pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ADL5611ARKZ-R7.
What parts are used alongside the ADL5611ARKZ-R7?
The PE43713B-Z, RCAT-01+, RPS-2-30+, TPS7A4700xRGW and XLF-172H+ appear in the most repositories here.
Which microcontrollers do boards using the ADL5611ARKZ-R7 use?
Most are built on FPGA (1).
How big is a typical board using the ADL5611ARKZ-R7?
The median is 89 × 76.2 mm, and 0% are two-layer designs.
What is the most popular open source board using the ADL5611ARKZ-R7?
By GitHub stars, MurPhySDR by MillePoels, with 14 stars.
Can I simulate one of these boards using the ADL5611ARKZ-R7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.