Flux-Capacitor-Alarm-Clock for-ESPHome
JamesOsborn-SE·Flux-Capacitor-Alarm-Clock-for-ESPHome·board/board.kicad_pcb
About the Flux-Capacitor-Alarm-Clock for-ESPHome PCB
Flux-Capacitor-Alarm-Clock for-ESPHome is an open source ESP32 PCB design by JamesOsborn-SE, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 60 mm, with 3 components from 3 distinct parts.
Its main chip is the ESP32_DevKit_V1_DOIT, from the ESP32 family.
It belongs with the iot & wireless, audio and displays & leds designs in this gallery.
From the project
Make an alarm clock that works with ESPHome and Home Assistant and will run offline without lan or internets Borrow the work of Flux Capacitor - Alarm Clock by jeje95 * Remake the printable in OpenSCAD so it can be easily modified™️
Make an alarm clock that works with ESPHome and Home Assistant and will run offline without lan or internets Borrow the work of Flux Capacitor - Alarm Clock by jeje95 * Remake the printable in OpenSCAD so it can be easily modified™️
* The board has issues that I'm not planing on fixing
* Parametric design in OpenSCAD is incomplete
Allow changing ALL settings using the three buttons only alarm for now. Hold the stop/setup and press hr or min to change alarm Make lithograph hot swappable I'm thinking insert from the side onto a rail with finger hold protruding. * Add pictures, video, and…
Flux-Capacitor-Alarm-Clock for-ESPHome bill of materials (BOM)
3 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x02_Socket | JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | 5vPower |
| 1 | ESP32_DevKit_V1_DOIT | esp32_devkit_v1_doit | ESP32-DevBoard-DOIT |
| 1 | 69 | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R1 |
Flux-Capacitor-Alarm-Clock for-ESPHome design files
The KiCad project lives in the JamesOsborn-SE/Flux-Capacitor-Alarm-Clock-for-ESPHome repository on GitHub; these links point at the commit this page was built from.
- Layoutboard/board.kicad_pcb
- Schematicboard/board.kicad_sch
Flux-Capacitor-Alarm-Clock for-ESPHome: common questions
What microcontroller does the Flux-Capacitor-Alarm-Clock for-ESPHome use?
The Flux-Capacitor-Alarm-Clock for-ESPHome is built around the ESP32_DevKit_V1_DOIT, from the ESP32 family.
How big is the Flux-Capacitor-Alarm-Clock for-ESPHome PCB?
The Flux-Capacitor-Alarm-Clock for-ESPHome measures 100 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Flux-Capacitor-Alarm-Clock for-ESPHome?
3 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Flux-Capacitor-Alarm-Clock for-ESPHome design files?
From the JamesOsborn-SE/Flux-Capacitor-Alarm-Clock-for-ESPHome repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Flux-Capacitor-Alarm-Clock for-ESPHome design in my own project?
Yes, under the terms of its MIT license, which JamesOsborn-SE chose for the repository.
Can I test firmware for the Flux-Capacitor-Alarm-Clock for-ESPHome without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k