Luxeon c
Jana-Marie·LAEMP-Spoet·luxeon-c/luxeon-c.kicad_pcb
About the Luxeon c PCB
Luxeon c is an open source PCB design by Jana-Marie, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 42 × 42 mm, with 26 components from 3 distinct parts.
It belongs with the dev boards & breakouts and power & battery designs in this gallery.
From the project
The LÄMP-Spöt, a snack for moths
LÄMP-Spöt is an open source, multi-channel (multi-colour) LED spot that aims to deliver high quality effect-lighting through up to 6 LED-channels with ~10W each. This allows for a broader colour range than just RGB or RGBW, but RGB + non-mixed secondaries (i.e. RGB, Yellow, Cyan, Purple), RGB + Yellow + Whites, a variety of White tones (with degrees of Red, Blue and Green hues) and of course effect channels (i.e. UV, IR). In that, I have assembled various spöts that follow these suggestions, one that features RGBY + UV + IR, RGBY + IR + White and one with three channels of white + UV + IR for…

Luxeon c bill of materials (BOM)
26 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Pos | CONN_1x06_SMD_SIDE | J1 |
| 1 | Neg | CONN_1x06_SMD_SIDE | J2 |
| 24 | luxeon-c | luxeon-c | P1, P2, P3, P4, P5, P6, P7, P8 +16 |
Luxeon c design files
The KiCad project lives in the Jana-Marie/LAEMP-Spoet repository on GitHub; these links point at the commit this page was built from.
- Layoutluxeon-c/luxeon-c.kicad_pcb
- Schematicluxeon-c/luxeon-c.kicad_sch
Luxeon c: common questions
How big is the Luxeon c PCB?
The Luxeon c measures 42 × 42 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Luxeon c?
26 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Luxeon c design files?
From the Jana-Marie/LAEMP-Spoet repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Luxeon c design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which Jana-Marie chose for the repository.
More boards in LAEMP-Spoet
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k