GPS-Audio
JanClyde05·Road-Accident-Monitoring-System·UI Redesign/PCB/GPS-Audio_PCB/GPS-Audio_PCB.kicad_pcb
About the GPS-Audio PCB
GPS-Audio is an open source ESP32 PCB design by JanClyde05, published on GitHub. It is a 2-layer board measuring 58 × 45.2 mm, with 4 components from 4 distinct parts.
Its main chip is the ESP32-S3-SuperMini, from the ESP32 family. By type, the board carries 2 ICs and 1 switch.
It belongs with the audio and rf & radio designs in this gallery.
From the project
This contains everything you need to run your app locally.
This contains everything you need to run your app locally.
View your app in AI Studio: https://ai.studio/apps/55c1c83b-df57-4b07-8c2f-16a12dc1c763
1. Install dependencies: npm install 2. Set the GEMINIAPIKEY in .env.local to your Gemini API key 3. Run the app: npm run dev

GPS-Audio bill of materials (BOM)
4 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | NEO7 | U2 |
| 1 | ~ | JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | U3 |
| 1 | ~ | ESP32-S3-SuperMini | ESP32_S1 |
| 1 | SW_Push | SW_TH_Tactile_Omron_B3F-100x | SW1 |
GPS-Audio design files
The KiCad project lives in the JanClyde05/Road-Accident-Monitoring-System repository on GitHub; these links point at the commit this page was built from.
GPS-Audio: common questions
What microcontroller does the GPS-Audio use?
The GPS-Audio is built around the ESP32-S3-SuperMini, from the ESP32 family.
How big is the GPS-Audio PCB?
The GPS-Audio measures 58 × 45.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the GPS-Audio?
4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the GPS-Audio design files?
From the JanClyde05/Road-Accident-Monitoring-System repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the GPS-Audio design in my own project?
The repository has no license, so all rights stay with JanClyde05. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the GPS-Audio without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Road-Accident-Monitoring-System
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k