RAMS

JanClyde05·Road-Accident-Monitoring-System·KiCAD Files/Antigravity Build/RAMS - PCB/RAMS - PCB.kicad_pcb

RAMS PCB layout, top view — open source ESP32 board by JanClyde05

About the RAMS PCB

RAMS is an open source ESP32 PCB design by JanClyde05, published on GitHub. It is a 2-layer board measuring 42 × 32 mm, with 67 components from 42 distinct parts.

Its main chip is the ESP32-S3FH4R2, from the ESP32 family. Other key parts include the Ai-Thinker-Ra-02, LTH7R, DW01A and AP2112K-3.3. By type, the board carries 29 capacitors, 15 resistors, 5 ICs, 3 transistors, 3 switches and 3 diodes.

It belongs with the iot & wireless, rf & radio and sensors designs in this gallery.

From the project

A real-time highway emergency detection and dispatch system using wearable IoT sensors, long-range LoRa radio, and a standalone Windows command center.

A real-time highway emergency detection and dispatch system using wearable IoT sensors, long-range LoRa radio, and a standalone Windows command center.

RAMS detects road accidents in real time using smartphone-grade 100Hz inertial measurement, broadcasts emergency alerts over 433MHz LoRa radio links that bypass cellular network outages, and delivers live incident telemetry to a standalone Windows rescuer desktop application for immediate dispatch response.

Main components on the RAMS

RAMS bill of materials (BOM)

67 components, 42 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3FH4R2
U1
1
Ai-Thinker-Ra-02
U2
1
LTH7R
U3
1
DW01A
U4
1
AP2112K-3.3
U5
1
AO3401A
Q1
1
BC817-25
Q2
1
FS8205A
Q3
1
40MHz
Y1
1
TYPE-C-31-M-12
J1
1
SM02B-SRSS-TB
J2
1
2450AT18D0100E
ANT1
1
SMD-9650-3327
BZ1
1
MSK12C02
SW1
2
KMR2
SW2, SW3
1
SK6805-EC20
LED1
1
USBLC6-2SC6
D1
1
SS14W
D2
1
1N4148W
D3
1
FerriteBead
FB1
Show 22 more
QtyPartRefs
1
2nH
L1
1
2.4nH
L2
5
10uF
C1, C7, C9, C11, C26
11
0.1uF
C2, C5, C6, C13, C14, C15, C16, C20 +3
5
1uF
C3, C12, C17, C22, C23
1
4.7uF
C4
2
47uF
C8, C10
1
2.7pF
C18
1
2.4pF
C19
1
10nF
C21
2
12pF
C24, C25
2
5.1k
R1, R2
1
4.02k
R3
1
330R
R4
2
1k
R5, R12
3
100k
R6, R7, R13
1
10k
R8
1
22R
R9
1
0R
R10
1
33R
R11
1
330k
R14
1
180k
R15

RAMS design files

The KiCad project lives in the JanClyde05/Road-Accident-Monitoring-System repository on GitHub; these links point at the commit this page was built from.

RAMS: common questions

What microcontroller does the RAMS use?

The RAMS is built around the ESP32-S3FH4R2, from the ESP32 family.

How big is the RAMS PCB?

The RAMS measures 42 × 32 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RAMS?

67 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the RAMS design files?

From the JanClyde05/Road-Accident-Monitoring-System repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the RAMS design in my own project?

The repository has no license, so all rights stay with JanClyde05. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RAMS without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Road-Accident-Monitoring-System

Similar boards