6 open source boards using the NUCLEO-G431KB

Real designs built with the NUCLEO-G431KB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the NUCLEO-G431KB

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the NUCLEO-G431KB connects to, and the resistors, capacitors and other passives placed on it.

  • The AREF pins is left unconnected on 3 of 3 designs.
  • The PB0(D3) pin has a series resistor on 2 of 2 designs, most often 100 Ω (then 1 kΩ).
  • The D1_1 pin is left unconnected on 2 of 2 designs.
  • The 5V pins is tied to 5V on 2 of 3 designs.
D1_1pin 1Connected to: Not connected 100%
VINpin 2.1, CN3_1Connected to: 8V 67% · not connected 33%
5Vpin 2.4, CN3_4Connected to: 5V 67% · not connected 33%
AREFpin 2.13, CN3_13Connected to: Not connected 100%
RST_3pin 3Connected to: Not connected 100%
D12_15pin 15Connected to: Not connected 100%
GND_17pin 17Connected to: GND 100%
+5V_19pin 19Connected to: Not connected 100%
A4_23pin 23Connected to: Not connected 100%
A0_27pin 27Connected to: Not connected 100%
AREF_28pin 28Connected to: Not connected 100%
VCCpin CN2_1Connected to: Not connected 100%
SWCLKpin CN2_2Connected to: Not connected 100%
GND_SWDpin CN2_3Connected to: Not connected 100%
SWDIOpin CN2_4Connected to: Not connected 100%
GND_CN3pin CN3_2Connected to: GND 100%
RST_CN3pin CN3_3Connected to: Not connected 100%
RST_CN4pin CN4_3Connected to: Not connected 100%
GND_CN4pin CN4_4Connected to: GND 100%
PB0(D3)pin CN4_6Connected to: Signal 100%
  • Series resistor on 100% · 100 Ω (6), 1 kΩ (1)
PF1(D8)pin CN4_11Connected to: Not connected 100%

43 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Unicontroller FDCAN head by jarekkt, Stepper impulse by bastien-sagetat, Balise tofs by EsialRobotik and Carte moteur by evolutek.

The NUCLEO-G431KB in open source designs

The gallery holds 6 open source boards using the NUCLEO-G431KB from 5 GitHub repositories; a typical one measures about 73.8 × 79.8 mm and carries around 45 components.

67% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Unicontroller FDCAN head by jarekkt.

Microcontrollers on boards using the NUCLEO-G431KB

What boards using the NUCLEO-G431KB are built for

NUCLEO-G431KB: common questions

Where can I find a NUCLEO-G431KB reference design?

Each of the 6 boards on this page is a real design using the NUCLEO-G431KB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the NUCLEO-G431KB AREF pin connected?

The AREF pins is left unconnected on 3 of 3 designs. Counted from the KiCad layouts of 5 open source designs using the NUCLEO-G431KB.

What resistor goes on the NUCLEO-G431KB PB0(D3) pin?

The PB0(D3) pin has a series resistor on 2 of 2 designs, most often 100 Ω (then 1 kΩ). Counted from the KiCad layouts of 5 open source designs using the NUCLEO-G431KB.

How is the NUCLEO-G431KB D1_1 pin connected?

The D1_1 pin is left unconnected on 2 of 2 designs. Counted from the KiCad layouts of 5 open source designs using the NUCLEO-G431KB.

Which microcontrollers do boards using the NUCLEO-G431KB use?

Most are built on AVR/Arduino (1), ESP32 (1) and Raspberry Pi (1).

How big is a typical board using the NUCLEO-G431KB?

The median is 73.8 × 79.8 mm, and 67% are two-layer designs.

What is the most popular open source board using the NUCLEO-G431KB?

By GitHub stars, Unicontroller FDCAN head by jarekkt, with 6 stars.

Can I simulate one of these boards using the NUCLEO-G431KB before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part