23 open source boards using the TMC2209_SILENTSTEPSTICK

Real designs built with the TMC2209_SILENTSTEPSTICK, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

23 boardsClear filters|Most starred

How designs wire the TMC2209_SILENTSTEPSTICK

Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the TMC2209_SILENTSTEPSTICK connects to, and the resistors, capacitors and other passives placed on it.

  • The INDEX pin is left unconnected on 11 of 14 designs (a signal on 3).
  • The VM pin has a decoupling capacitor on 8 of 17 designs, most often 100 µF (then 100 nF).
GNDpin 1, 7Connected to: GND 82% · a signal 18%
VIOpin 2Connected to: 3.3V 76% · a signal 24%
VMpin 8Connected to: 24V 65% · a signal 35%
  • Decoupling capacitor on 47% · 100 µF (11), 100 nF (3), 10 µF (1)
INDEXpin 17Connected to: Not connected 79% · a signal 21%

13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include UniMixBase by jarekkt, SCARA-Robot-Based on-ESP32-C6 by jobitjoseph, Tester circut by yazidta and 3d printer by Angelo13C.

The TMC2209_SILENTSTEPSTICK in open source designs

The gallery holds 23 open source boards using the TMC2209_SILENTSTEPSTICK from 19 GitHub repositories; a typical one measures about 100 × 75 mm and carries around 43 components.

71% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.

The most starred is UniMixBase by jarekkt.

Microcontrollers on boards using the TMC2209_SILENTSTEPSTICK

What boards using the TMC2209_SILENTSTEPSTICK are built for

TMC2209_SILENTSTEPSTICK: common questions

Where can I find a TMC2209_SILENTSTEPSTICK reference design?

Each of the 23 boards on this page is a real design using the TMC2209_SILENTSTEPSTICK. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TMC2209_SILENTSTEPSTICK INDEX pin connected?

The INDEX pin is left unconnected on 11 of 14 designs (a signal on 3). Counted from the KiCad layouts of 17 open source designs using the TMC2209_SILENTSTEPSTICK.

What decoupling capacitors do designs use on the TMC2209_SILENTSTEPSTICK VM pin?

The VM pin has a decoupling capacitor on 8 of 17 designs, most often 100 µF (then 100 nF). Counted from the KiCad layouts of 17 open source designs using the TMC2209_SILENTSTEPSTICK.

What parts are used alongside the TMC2209_SILENTSTEPSTICK?

The ADP7118AUJZ-3.3-R7, AMS1117-3.3, DEVKIT_V1_ESP32-WROOM-32, ESP32-C6-WROOM-1 and LM2596S-5 appear in the most repositories here.

Which microcontrollers do boards using the TMC2209_SILENTSTEPSTICK use?

Most are built on ESP32 (12), RP2040/RP2350 (3) and STM32 (3).

How big is a typical board using the TMC2209_SILENTSTEPSTICK?

The median is 100 × 75 mm, and 71% are two-layer designs.

What is the most popular open source board using the TMC2209_SILENTSTEPSTICK?

By GitHub stars, UniMixBase by jarekkt, with 6 stars.

Can I simulate one of these boards using the TMC2209_SILENTSTEPSTICK before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part