Embedded-System-Project

jastikai·Embedded-System-Project·embedded_system_project_kicad/embedded_system_project.kicad_pcb

Embedded-System-Project PCB layout, top view — open source ESP32 board by jastikai

About the Embedded-System-Project PCB

Embedded-System-Project is an open source ESP32 PCB design by jastikai, published on GitHub. It is a 2-layer board measuring 125.2 × 86.4 mm, with 57 components from 30 distinct parts.

Its main chip is the ESP32-S3-DevKitC, from the ESP32 family. By type, the board carries 19 resistors, 14 capacitors, 8 LEDs, 1 IC, 1 transistor and 1 fuse.

From the project

Repository for Embedded System Project course of University of Oulu, Spring 2024.

Main components on the Embedded-System-Project

Embedded-System-Project bill of materials (BOM)

57 components, 30 distinct parts.

QtyPartRefs
1
ESP32-S3-DevKitC
MCU1
1
2N2222A
Q1
1
D2
1N914
1
TBLOCK-X2
BATTERY1
1
2300Hz
BUZZER1
1
1A
F1
1
GY-521
GYRO1
1
Microphone_Condenser
MK1
2
LM358
OPAMP1, OPAMP2
1
R_3386P, 100k
POTENTIOMETER1
1
DC 2.0mm
PWR_IN1
1
L7805
REG1
1
LM1085-3.3
REG2
1
Switch
SWITCH1
2
LED_RED
20%LED1, 40%LED1
1
LED_BLUE
60%LED1
2
LED_GREEN
80%LED1, 100%LED1
3
LED_RED
DEBUG_LED1, DEBUG_LED2, LED1
1
1N4007
D1
4
1000 microF
C1, C3, C6, C14
Show 10 more
QtyPartRefs
9
100 nF
C2, C4, C7, C8, C9, C10, C11, C12 +1
1
1 microF
C5
1
4.7k
R1
1
8.6k
R2
1
5k
R3
2
10k
R4, R15
11
1k
R5, R6, R7, R8, R9, R10, R11, R12 +3
1
20k
R16
1
1M
R17
1
2k
R19

Embedded-System-Project design files

The KiCad project lives in the jastikai/Embedded-System-Project repository on GitHub; these links point at the commit this page was built from.

Embedded-System-Project: common questions

What microcontroller does the Embedded-System-Project use?

The Embedded-System-Project is built around the ESP32-S3-DevKitC, from the ESP32 family.

How big is the Embedded-System-Project PCB?

The Embedded-System-Project measures 125.2 × 86.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Embedded-System-Project?

57 components, from 30 distinct parts. The full bill of materials is listed on this page.

Where can I download the Embedded-System-Project design files?

From the jastikai/Embedded-System-Project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Embedded-System-Project design in my own project?

The repository has no license, so all rights stay with jastikai. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Embedded-System-Project without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards