PrelimHolocube v0

jaydenaleung·prelimHolocube·prelimHolocube/pcb/prev-versions/v0.0/prelimHolocube_v0.kicad_pcb

PrelimHolocube v0 PCB layout, top view — open source board by jaydenaleung

About the PrelimHolocube v0 PCB

PrelimHolocube v0 is an open source PCB design by jaydenaleung, published on GitHub. It is a 2-layer board measuring 28.2 × 51.4 mm, with 38 components from 7 distinct parts.

By type, the board carries 24 capacitors, 9 resistors and 5 ICs.

It belongs with the displays & leds designs in this gallery, and the repository also holds 1 earlier revision of it.

From the project

A three dimensional volumetric cube made of stacked transparent OLED displays. Custom firmware logic to display three dimensional objects in realtime.

A volumetric display from stacked transparent displays as a premise to a true free-floating voxel-array display.

Holocube is a volumetric (three dimensional) display that utilizes transparent OLED display modules placed on top of each other to create a 128 by 128 by 8 pixel array. The goal of this project is to make a plain, electrical engineering-focused "hologram solution" before attempting to build a more theoretical or physics-based model for three-dimensional displays. The device is primarily run through an Arduino/ESP32-style microcontroller.

PrelimHolocube v0, from the project README
From the project README

PrelimHolocube v0 bill of materials (BOM)

38 components, 7 distinct parts.

QtyPartRefs
3
~
U1, U2, U3
1
~
U9
1
~
U10
16
4.7uF
C1, C3, C5, C6, C11, C12, C14, C15 +8
8
1uF
C2, C4, C10, C13, C19, C21, C25, C27
8
1M
R1, R2, R4, R5, R7, R8, R9, R10
1
10k
R3

PrelimHolocube v0 design files

The KiCad project lives in the jaydenaleung/prelimHolocube repository on GitHub; these links point at the commit this page was built from.

PrelimHolocube v0: common questions

How big is the PrelimHolocube v0 PCB?

The PrelimHolocube v0 measures 28.2 × 51.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PrelimHolocube v0?

38 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the PrelimHolocube v0 design files?

From the jaydenaleung/prelimHolocube repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the PrelimHolocube v0 design in my own project?

The repository has no license, so all rights stay with jaydenaleung. Use it as a reference, and ask the author before reusing the design.

More boards in prelimHolocube

Earlier revisions in the repo: prelimHolocube

Similar boards