Holocube

jaydenaleung·prelimHolocube·prelimHolocube/pcb/v1.0/main/holocube.kicad_pcb

Holocube PCB layout, top view — open source ESP32 board by jaydenaleung

About the Holocube PCB

Holocube is an open source ESP32 PCB design by jaydenaleung, published on GitHub. It is a 2-layer board measuring 54.5 × 54.5 mm, with 50 components from 12 distinct parts.

Its main chip is the devkitv1-30pin, from the ESP32 family. Other key parts include the KY-040. By type, the board carries 25 capacitors, 12 resistors, 11 ICs, 1 connector and 1 diode.

It belongs with the displays & leds designs in this gallery.

From the project

A three dimensional volumetric cube made of stacked transparent OLED displays. Custom firmware logic to display three dimensional objects in realtime.

A volumetric display from stacked transparent displays as a premise to a true free-floating voxel-array display.

Holocube is a volumetric (three dimensional) display that utilizes transparent OLED display modules placed on top of each other to create a 128 by 128 by 8 pixel array. The goal of this project is to make a plain, electrical engineering-focused "hologram solution" before attempting to build a more theoretical or physics-based model for three-dimensional displays. The device is primarily run through an Arduino/ESP32-style microcontroller.

Holocube, from the project README
From the project README

Main components on the Holocube

Holocube bill of materials (BOM)

50 components, 12 distinct parts.

QtyPartRefs
8
~
U1, U2, U3, U4, U5, U6, U7, U8
1
~
U9
1
~
U10
1
KY-040
U11
1
USB4105-GF-A
J2
1
LED
D1
16
4.7uF
C1, C3, C5, C6, C8, C9, C11, C12 +8
8
1uF ceramic
C2, C4, C7, C10, C13, C15, C19, C21
1
10nF 100V
C26
9
1M
R1, R2, R3, R4, R5, R6, R7, R8 +1
2
5.1k 1%
R11, R12
1
68
R13

Holocube design files

The KiCad project lives in the jaydenaleung/prelimHolocube repository on GitHub; these links point at the commit this page was built from.

Holocube: common questions

What microcontroller does the Holocube use?

The Holocube is built around the devkitv1-30pin, from the ESP32 family.

How big is the Holocube PCB?

The Holocube measures 54.5 × 54.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Holocube?

50 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the Holocube design files?

From the jaydenaleung/prelimHolocube repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Holocube design in my own project?

The repository has no license, so all rights stay with jaydenaleung. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Holocube without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in prelimHolocube

Similar boards