Test multi board
jaydenaleung·prelimHolocube·prelimHolocube/pcb/v1.0/test_multi-board/test_multi-board.kicad_pcb
About the Test multi board
Test multi board is an open source ESP32 PCB design by jaydenaleung, published on GitHub. It is a 2-layer board measuring 99.2 × 95.5 mm, with 59 components from 15 distinct parts.
Its main chip is the devkitv1-30pin, from the ESP32 family. By type, the board carries 24 capacitors, 17 resistors, 10 ICs and 8 connectors.
It belongs with the displays & leds designs in this gallery.
From the project
A three dimensional volumetric cube made of stacked transparent OLED displays. Custom firmware logic to display three dimensional objects in realtime.
A volumetric display from stacked transparent displays as a premise to a true free-floating voxel-array display.
Holocube is a volumetric (three dimensional) display that utilizes transparent OLED display modules placed on top of each other to create a 128 by 128 by 8 pixel array. The goal of this project is to make a plain, electrical engineering-focused "hologram solution" before attempting to build a more theoretical or physics-based model for three-dimensional displays. The device is primarily run through an Arduino/ESP32-style microcontroller.
Test multi board bill of materials (BOM)
59 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | ~ | surenoo-1.12in-128x128 | U1, U2, U3, U4, U5, U6, U7, U8 |
| 1 | ~ | devkitv1-30pin | U9 |
| 1 | ~ | PinHeader_1x02_P2.54mm_Vertical | U10 |
| 1 | Breakout_1 | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Breakout_2 | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Breakout_3 | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Breakout_4 | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Breakout_5 | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Breakout_6 | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Breakout_7 | PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | Breakout_8 | PinHeader_1x04_P2.54mm_Vertical | J8 |
| 16 | 4.7uF | CP_Radial_D4.0mm_P2.00mm | C1, C3, C4, C6, C7, C9, C10, C12 +8 |
| 8 | 1uF ceramic | C_Disc_D6.0mm_W2.5mm_P5.00mm | C2, C5, C8, C11, C14, C17, C20, C23 |
| 8 | 750k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R4, R7, R10, R13, R16, R19, R22 |
| 9 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R5, R6, R8, R9, R11, R12 +1 |
Test multi board design files
The KiCad project lives in the jaydenaleung/prelimHolocube repository on GitHub; these links point at the commit this page was built from.
Test multi board: common questions
What microcontroller does the Test multi board use?
The Test multi board is built around the devkitv1-30pin, from the ESP32 family.
How big is the Test multi board?
The Test multi board measures 99.2 × 95.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Test multi board?
59 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Test multi board design files?
From the jaydenaleung/prelimHolocube repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Test multi board design in my own project?
The repository has no license, so all rights stay with jaydenaleung. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Test multi board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in prelimHolocube
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k