Test single board

jaydenaleung·prelimHolocube·prelimHolocube/pcb/v1.0/test_single-board/test_single-board.kicad_pcb

Test single board layout, top view — open source ESP32 board by jaydenaleung

About the Test single board

Test single board is an open source ESP32 PCB design by jaydenaleung, published on GitHub. It is a 2-layer board measuring 56.5 × 53.9 mm, with 7 components from 6 distinct parts.

Its main chip is the devkitv1-30pin, from the ESP32 family. By type, the board carries 3 ICs, 3 capacitors and 1 resistor.

It belongs with the displays & leds designs in this gallery.

From the project

A three dimensional volumetric cube made of stacked transparent OLED displays. Custom firmware logic to display three dimensional objects in realtime.

A volumetric display from stacked transparent displays as a premise to a true free-floating voxel-array display.

Holocube is a volumetric (three dimensional) display that utilizes transparent OLED display modules placed on top of each other to create a 128 by 128 by 8 pixel array. The goal of this project is to make a plain, electrical engineering-focused "hologram solution" before attempting to build a more theoretical or physics-based model for three-dimensional displays. The device is primarily run through an Arduino/ESP32-style microcontroller.

Test single board, from the project README
From the project README

Test single board bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
~
U1
1
~
U9
1
~
U10
2
4.7uF
C1, C3
1
1uF ceramic
C2
1
1M
R1

Test single board design files

The KiCad project lives in the jaydenaleung/prelimHolocube repository on GitHub; these links point at the commit this page was built from.

Test single board: common questions

What microcontroller does the Test single board use?

The Test single board is built around the devkitv1-30pin, from the ESP32 family.

How big is the Test single board?

The Test single board measures 56.5 × 53.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Test single board?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Test single board design files?

From the jaydenaleung/prelimHolocube repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Test single board design in my own project?

The repository has no license, so all rights stay with jaydenaleung. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Test single board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in prelimHolocube

Similar boards