CatShelterMonitor Carrier-RevC RJ45
About the CatShelterMonitor Carrier-RevC RJ45 PCB
CatShelterMonitor Carrier-RevC RJ45 is an open source PCB design by JayPerez1, published on GitHub. It is a 2-layer board measuring 80 × 79.5 mm, with 10 components from 7 distinct parts.
It belongs with the sensors designs in this gallery.
From the project
System to monitor temperatures and occupency in feral cat shelters
Battery-powered temperature data logger to monitor temperatures and occupency in an outdoor feral cat shelter.
CatShelterMonitor Carrier-RevC RJ45 bill of materials (BOM)
10 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RJ45_Keystone_5520460 | RJ45_Amphenol_RJHSE5380 | J_AMG1 |
| 2 | J_BATT_OUT | TerminalBlock_4Ucon_1x02_P3.50mm_Vertical | J_BATT_IN1, J_BATT_IN2 |
| 2 | Conn_01x16 | PinSocket_1x16_P2.54mm_Vertical | J_FEATHER_L1, J_FEATHER_R1 |
| 1 | Conn_01x09 | PinSocket_1x09_P2.54mm_Vertical | J_FRAM1 |
| 2 | Conn_01x03_Socket | TerminalBlock_4Ucon_1x03_P3.50mm_Vertical | J_PROBE_1, J_PROBE_2 |
| 1 | Conn_01x08 | PinSocket_1x08_P2.54mm_Vertical | J_RTC1 |
| 1 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_PULLUP_A1 |
CatShelterMonitor Carrier-RevC RJ45 design files
The KiCad project lives in the JayPerez1/RocketsCatShelterMonitor repository on GitHub; these links point at the commit this page was built from.
CatShelterMonitor Carrier-RevC RJ45: common questions
How big is the CatShelterMonitor Carrier-RevC RJ45 PCB?
The CatShelterMonitor Carrier-RevC RJ45 measures 80 × 79.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CatShelterMonitor Carrier-RevC RJ45?
10 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CatShelterMonitor Carrier-RevC RJ45 design files?
From the JayPerez1/RocketsCatShelterMonitor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the CatShelterMonitor Carrier-RevC RJ45 design in my own project?
The repository has no license, so all rights stay with JayPerez1. Use it as a reference, and ask the author before reusing the design.
More boards in RocketsCatShelterMonitor
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956