Esp03-breakout
About the Esp03-breakout
Esp03-breakout is an open source ESP8266 PCB design by jcmvbkbc, published on GitHub. It is a 2-layer board measuring 49.5 × 49.5 mm, with 16 components from 8 distinct parts.
Its main chip is the ESP8266-ESP03, from the ESP8266 family. By type, the board carries 6 resistors, 3 connectors, 3 jumpers, 2 switches, 1 IC and 1 capacitor.
It belongs with the usb & debug tools and dev boards & breakouts designs in this gallery.
From the project
Programmer & JTAG debugger for ESP8266
Main components on the Esp03-breakout
Esp03-breakout bill of materials (BOM)
16 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP8266-ESP03 | esp_03 | U1 |
| 1 | JTAG | pin_array_10x2 | P1 |
| 1 | SERIAL | pin_array_10x2 | P2 |
| 1 | CONN_2 | PIN_ARRAY_2X1 | P3 |
| 3 | JUMPER3 | SIL-3 | JP1, JP2, JP3 |
| 2 | SWITCH_INV2 | SWITCH_INV2 | SW1, SW2 |
| 1 | C | SM0805 | C1 |
| 6 | R | SM0805 | R1, R2, R3, R4, R5, R6 |
Esp03-breakout design files
The KiCad project lives in the jcmvbkbc/esp03-breakout repository on GitHub; these links point at the commit this page was built from.
Esp03-breakout: common questions
What microcontroller does the Esp03-breakout use?
The Esp03-breakout is built around the ESP8266-ESP03, from the ESP8266 family.
How big is the Esp03-breakout?
The Esp03-breakout measures 49.5 × 49.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp03-breakout?
16 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp03-breakout design files?
From the jcmvbkbc/esp03-breakout repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Esp03-breakout design in my own project?
The repository has no license, so all rights stay with jcmvbkbc. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp03-breakout without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in esp03-breakout
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Goatgdo
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398