ICEBrainstorm
jdekanter077·iCEBrainstorm·iCEBrainstorm/iCEBrainstorm.kicad_pcb
About the ICEBrainstorm PCB
ICEBrainstorm is an open source STM32 PCB design by jdekanter077, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 80 × 70 mm, with 103 components from 31 distinct parts.
Its main chip is the STM32F412RETX, from the STM32 family. Other key parts include the AMS1117-3.3, AMS1117-1.2, ICE40UP5K-SG48ITR, W25Q128 and LSM6DS3. By type, the board carries 43 resistors, 34 capacitors, 9 diodes, 6 ICs, 4 switches and 2 connectors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
A STM32F412 MCU with a iCE40UP5K FPGA on a compact dev board.
A STM32F412 MCU with a iCE40UP5K FPGA on a compact dev board.
You will need STMCubeMX, VSCode with the STM32Cube Extension and STMCubeProgrammer to program the STM.
You can use apio to synthesize and upload your hdl on the FPGA. Refer to apio support on how to configure apio to support the iCEBrainstorm board.
The code and bootloader of the SMT are stored inside the SMT IC, but the code and bootloader of the FPGA are stored on an external SPI Flash IC.

Main components on the ICEBrainstorm
ICEBrainstorm bill of materials (BOM)
103 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 Advanced Monolithic Systems | SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR | U1 |
| 1 | AMS1117-1.2 Advanced Monolithic Systems | SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR | U2 |
| 1 | STM32F412RETX STM32F412RETx | LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | ICE40UP5K-SG48ITR | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U4 |
| 1 | W25Q128 Winbond Elec | SOIC-8_L5.3-W5.3-P1.27-LS8.0-BL | U5 |
| 1 | LSM6DS3 | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U6 |
| 1 | HL2312 hongjiacheng | Q_SOT-23 | Q1 |
| 1 | C13738 16 MHz Yangxing Tech | OSC-SMD_4P-L3.2-W2.5-BL | X1 |
| 2 | C2927039 Connector, USB-TYPE-C-16P | TYPE-C-SMD_HX-TYPE-C-16PIN | J1, J16 |
| 1 | Housing, iCE-Brain Silkscreen | iCE-Brain | N1 |
| 1 | iCEBrainrot | Part_Num_JLCPCB | PN1 |
| 4 | C318884 RESET XKB Connectivity | SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL-2 | S1, S2, S3, S4 |
| 1 | C2297 1V2 ON - Green Hubei KENTO Elec | D_0805 | D1 |
| 1 | C2297 3V3 ON - Green Hubei KENTO Elec | D_0805 | D2 |
| 1 | C2297 VBUS ON - Green Hubei KENTO Elec | D_0805 | D3 |
| 1 | C2297 Configuration Ready - Green Hubei KENTO Elec | D_0805 | D4 |
| 5 | C2297 Green Hubei KENTO Elec | D_0805 | D5, D6, D7, D8, D9 |
| 1 | C1017 ~ Sunlord | FB_0805 | FB1 |
| 4 | 22UF 22uF Samsung Electro-Mechanics | C_0805 | C1, C2, C3, C4 |
| 6 | 4.7UF 4.7uF Samsung Electro-Mechanics | C_0805 | C5, C9, C15, C22, C23, C29 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 16 | 100NF 100nF YAGEO | C_0603 | C6, C7, C8, C10, C11, C12, C13, C14 +8 |
| 4 | 1UF 1uF Samsung Electro-Mechanics | C_0603 | C16, C18, C28, C32 |
| 2 | 10PF 10pF Samsung Electro-Mechanics | C_0603 | C17, C20 |
| 1 | 10NF 10nF FH(Guangdong Fenghua Advanced Tech) | C_0603 | C19 |
| 1 | 100nF YAGEO | C_0603 | C21 |
| 13 | 15kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R1, R8, R9, R10, R11, R12, R13, R14 +5 |
| 22 | 1.5kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R2, R5, R6, R15, R16, R17, R18, R19 +14 |
| 4 | 5.1kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R3, R4, R37, R38 |
| 1 | 100Ω UNI-ROYAL(Uniroyal Elec) | R_0603 | R7 |
| 1 | 2.2kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R22 |
| 2 | 68Ω UNI-ROYAL(Uniroyal Elec) | R_0603 | R42, R43 |
ICEBrainstorm design files
The KiCad project lives in the jdekanter077/iCEBrainstorm repository on GitHub; these links point at the commit this page was built from.
ICEBrainstorm: common questions
What microcontroller does the ICEBrainstorm use?
The ICEBrainstorm is built around the STM32F412RETX, from the STM32 family.
How big is the ICEBrainstorm PCB?
The ICEBrainstorm measures 80 × 70 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ICEBrainstorm?
103 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ICEBrainstorm design files?
From the jdekanter077/iCEBrainstorm repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ICEBrainstorm design in my own project?
Yes, under the terms of its GPL-3.0 license, which jdekanter077 chose for the repository.
Can I test firmware for the ICEBrainstorm without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k