LED Dimmer 12V
JeanOlivier·LED_Dimmer_12V
About the LED Dimmer 12V PCB
LED Dimmer 12V is an open source PCB design by JeanOlivier, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 37.5 × 20.3 mm, with 9 components from 8 distinct parts.
Other key parts include the NE555. By type, the board carries 2 diodes, 2 capacitors, 1 IC, 1 transformer and 1 resistor.
It belongs with the power & battery designs in this gallery.
From the project
PWM LED Dimmer built around a 555 timer. Designed for 12V+ power supply and using a CMOS transistor to support high power draw.
A pulse width modulation (PWM) LED Dimmer built around a 555 timer. Designed for 12V+ power supply (but should work for 5V+) and using a CMOS transistor to support high power draw.
The 555 part is inspired by this circuit.

Main components on the LED Dimmer 12V
LED Dimmer 12V bill of materials (BOM)
9 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555 | DIP-8_W7.62mm | IC1 |
| 1 | 12V | PINHEAD1-2 | 12V |
| 1 | 10K | Potentiometer_Alps_RK163_Single_Vertical | POT1 |
| 1 | IRF610 | TO-220_Horizontal | T1 |
| 2 | D | sod80c | D1, D2 |
| 1 | 10nF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1 |
| 1 | 10pF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C2 |
| 1 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1 |
LED Dimmer 12V design files
The KiCad project lives in the JeanOlivier/LED_Dimmer_12V repository on GitHub; these links point at the commit this page was built from.
- LayoutLED_Dimmer_12V.kicad_pcb
LED Dimmer 12V: common questions
How big is the LED Dimmer 12V PCB?
The LED Dimmer 12V measures 37.5 × 20.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LED Dimmer 12V?
9 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the LED Dimmer 12V design files?
From the JeanOlivier/LED_Dimmer_12V repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the LED Dimmer 12V design in my own project?
Yes, under the terms of its GPL-3.0 license, which JeanOlivier chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k