HardLabs

Ergodonk simple zero 2

JellyTitan·ErgoDonk·ergodonk_simple_zero/ergodonk_simple_zero 2.kicad_pcb

Ergodonk simple zero 2 PCB layout, top view — open source RP2040/RP2350 board by JellyTitan

About the Ergodonk simple zero 2 PCB

Ergodonk simple zero 2 is an open source RP2040/RP2350 PCB design by JellyTitan, published on GitHub under the MIT license. It is a 2-layer board measuring 216.6 × 155.6 mm, with 143 components from 21 distinct parts.

Its main chip is the rp2040-zero, from the RP2040/RP2350 family. By type, the board carries 55 diodes, 54 switches, 3 connectors, 1 IC, 1 transistor and 1 resistor.

It belongs with the keyboards designs in this gallery.

From the project

ErgoDox variant using standard SA keycaps, FDM case, and blackpill MCU

Ergodonk simple zero 2, from the project README
From the project README

Main components on the Ergodonk simple zero 2

rp2040-zero

Ergodonk simple zero 2 bill of materials (BOM)

143 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
rp2040-zero
MCU10
1
TIP120
Q1
1
Pimaroni Trackball
J10
1
4PIN
J11
1
Conn_01x08_Socket
J12
1
MUR340S
D_SOL_1
10
MountingHole
H1, H2, H3, H4, H5, H6, H7, H8 +2
15
MountingHole
H11, H12, H13, H14, H15, H16, H17, H18 +7
1
Conn_01x02_Female
J_SOL_1
1
Solenoid
S1
45
SW_PUSH_LED
SW0, SW1, SW2, SW3, SW4, SW5, SW6, SW7 +37
1
SW_PUSH_LED
SW08_RH10
2
SW_PUSH_LED
SW18_RH10, SW38_RH10
1
SW_PUSH_LED
SW27
1
SW_PUSH_LED
SW28_RH10
1
SW_PUSH_LED
SW37
1
SW_PUSH_LED
SW47
1
SW_PUSH_LED
SW48_RH10
1
RotaryEncoder_Switch
SWLH_ROT1
55
D
D0, D1, D2, D3, D4, D5, D6, D7 +47
Show 1 more
QtyPartRefs
1
1k
R2

Ergodonk simple zero 2 design files

The KiCad project lives in the JellyTitan/ErgoDonk repository on GitHub; these links point at the commit this page was built from.

Ergodonk simple zero 2: common questions

What microcontroller does the Ergodonk simple zero 2 use?

The Ergodonk simple zero 2 is built around the rp2040-zero, from the RP2040/RP2350 family.

How big is the Ergodonk simple zero 2 PCB?

The Ergodonk simple zero 2 measures 216.6 × 155.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ergodonk simple zero 2?

143 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ergodonk simple zero 2 design files?

From the JellyTitan/ErgoDonk repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Ergodonk simple zero 2 design in my own project?

Yes, under the terms of its MIT license, which JellyTitan chose for the repository.

Can I test firmware for the Ergodonk simple zero 2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in ErgoDonk

Similar boards