Electric fence monitor stripboard
jgOhYeah·Farm-PJON-LoRa-network·ElectricFenceMonitor/ElectricFenceMonitor/ElectricFenceMonitor.kicad_pcb
About the Electric fence monitor stripboard PCB
Electric fence monitor stripboard is an open source PCB design by jgOhYeah, published on GitHub under the MIT license. It is a 2-layer board measuring 83.8 × 33.7 mm, with 30 components from 28 distinct parts.
Other key parts include the Ra01_Breakout_Module and PICAXE-14M2. By type, the board carries 11 resistors, 8 diodes, 5 capacitors, 3 connectors, 2 ICs and 1 transistor.
It belongs with the rf & radio, power & battery and displays & leds designs in this gallery.
From the project
Code relating to a small LoRa network for remote monitoring and control
This branch of the PyLora library is required to talk to the radio module as it has been adapted for python 3.
Battery voltage monitor before the mosfet was added for controlling the fence and an external antenna to improve range.
The shed and setup of the battery monitor.
The monitor currently operates by timing how many half seconds the pump is on in a half hour block. At the end of each block, the monitor saves the time to a circular buffer stored in an EEPROM chip, calculates the average on time for all values in the chip and transmits the time on in the last half hour as well as the…

Main components on the Electric fence monitor stripboard
Electric fence monitor stripboard bill of materials (BOM)
30 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Ra01_Breakout_Module | DIP-8_W7.62mm_Socket_LongPads | U1 |
| 1 | PICAXE-14M2 | DIP-14_W7.62mm_Socket_LongPads | U2 |
| 1 | BC548 | TO-92_Inline_Wide | Q1 |
| 1 | Fence | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | Programming | Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J2 |
| 1 | Power | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | 1N4148 | D_DO-35_SOD27_P10.16mm_Horizontal | D1 |
| 2 | 1N4148 | D_DO-35_SOD27_P5.08mm_Vertical_KathodeUp | D2, D8 |
| 1 | 1N4148 | D_DO-35_SOD27_P12.70mm_Horizontal | D3 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D4, D7 |
| 1 | 5.1V | D_A-405_P10.16mm_Horizontal | D5 |
| 1 | LED | LED_D5.0mm | D6 |
| 1 | 0.1u | C_Rect_L9.0mm_W2.5mm_P7.50mm_MKT | C1 |
| 1 | 0.1u | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 0.47u | C_Disc_D5.0mm_W2.5mm_P5.00mm | C3 |
| 1 | 10u | CP_Radial_D13.0mm_P5.00mm | C4 |
| 1 | 100u | CP_Radial_D13.0mm_P5.00mm | C5 |
| 1 | 120 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R4 |
| 1 | 22k | R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R5 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R6 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 120k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R7 |
| 1 | 82k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9 |
| 1 | 33k | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R10 |
| 1 | 10Meg | R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R11 |
| 1 | 180 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12 |
| 1 | 2.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14 |
Electric fence monitor stripboard design files
The KiCad project lives in the jgOhYeah/Farm-PJON-LoRa-network repository on GitHub; these links point at the commit this page was built from.
Electric fence monitor stripboard: common questions
How big is the Electric fence monitor stripboard PCB?
The Electric fence monitor stripboard measures 83.8 × 33.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Electric fence monitor stripboard?
30 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Electric fence monitor stripboard design files?
From the jgOhYeah/Farm-PJON-LoRa-network repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Electric fence monitor stripboard design in my own project?
Yes, under the terms of its MIT license, which jgOhYeah chose for the repository.
More boards in Farm-PJON-LoRa-network
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k