Waterbaby

jgOhYeah·Farm-PJON-LoRa-network·IrrigationWaterDetector/WaterbabyLayout/WaterbabyLayout.kicad_pcb

Waterbaby PCB layout, top view — open source board by jgOhYeah

About the Waterbaby PCB

Waterbaby is an open source PCB design by jgOhYeah, published on GitHub under the MIT license. It is a 2-layer board measuring 61 × 33 mm, with 13 components from 13 distinct parts.

Other key parts include the Ra01_Breakout_Module and PICAXE-14M2. By type, the board carries 4 resistors, 3 connectors, 2 ICs, 2 diodes and 2 capacitors.

It belongs with the rf & radio, power & battery and displays & leds designs in this gallery.

From the project

Code relating to a small LoRa network for remote monitoring and control

This branch of the PyLora library is required to talk to the radio module as it has been adapted for python 3.

Battery voltage monitor before the mosfet was added for controlling the fence and an external antenna to improve range.

The shed and setup of the battery monitor.

The monitor currently operates by timing how many half seconds the pump is on in a half hour block. At the end of each block, the monitor saves the time to a circular buffer stored in an EEPROM chip, calculates the average on time for all values in the chip and transmits the time on in the last half hour as well as the…

Waterbaby, from the project README
From the project README

Main components on the Waterbaby

Ra01_Breakout_ModulePICAXE-14M2

Waterbaby bill of materials (BOM)

13 components, 13 distinct parts.

QtyPartRefs
1
Ra01_Breakout_Module
U1
1
PICAXE-14M2
U2
1
Power
J1
1
Programming
J2
1
Sensor
J3
1
1N4004
D1
1
LED
D2
1
100u
C1
1
0.1u
C2
1
4.7
R1
1
22k
R2
1
10k
R3
1
470
R4

Waterbaby design files

The KiCad project lives in the jgOhYeah/Farm-PJON-LoRa-network repository on GitHub; these links point at the commit this page was built from.

Waterbaby: common questions

How big is the Waterbaby PCB?

The Waterbaby measures 61 × 33 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Waterbaby?

13 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Waterbaby design files?

From the jgOhYeah/Farm-PJON-LoRa-network repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Waterbaby design in my own project?

Yes, under the terms of its MIT license, which jgOhYeah chose for the repository.

More boards in Farm-PJON-LoRa-network

Similar boards