BatteryMonitorVeroboard

jgOhYeah·Farm-PJON-LoRa-network·BatteryVoltageMonitor/BatteryMonitorVeroboardLayout/BatteryMonitorVeroboardLayout.kicad_pcb

BatteryMonitorVeroboard PCB layout, top view — open source board by jgOhYeah

About the BatteryMonitorVeroboard PCB

BatteryMonitorVeroboard is an open source PCB design by jgOhYeah, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 50 mm, with 23 components from 21 distinct parts.

Other key parts include the Ra01_Breakout_Module, MIC2954, PICAXE-14M2 and DS18B20. By type, the board carries 8 resistors, 4 ICs, 4 capacitors, 3 diodes, 2 connectors and 1 transistor.

It belongs with the rf & radio, power & battery and displays & leds designs in this gallery.

From the project

Code relating to a small LoRa network for remote monitoring and control

This branch of the PyLora library is required to talk to the radio module as it has been adapted for python 3.

Battery voltage monitor before the mosfet was added for controlling the fence and an external antenna to improve range.

The shed and setup of the battery monitor.

The monitor currently operates by timing how many half seconds the pump is on in a half hour block. At the end of each block, the monitor saves the time to a circular buffer stored in an EEPROM chip, calculates the average on time for all values in the chip and transmits the time on in the last half hour as well as the…

BatteryMonitorVeroboard, from the project README
From the project README

Main components on the BatteryMonitorVeroboard

Ra01_Breakout_ModuleMIC2954PICAXE-14M2DS18B20

BatteryMonitorVeroboard bill of materials (BOM)

23 components, 21 distinct parts.

QtyPartRefs
1
Ra01_Breakout_Module
U1
1
MIC2954
U2
1
PICAXE-14M2
U3
1
DS18B20
U4
1
IRLB8721PBF
Q1
1
Screw_Terminal_01x03
J1
1
Conn_01x03
J2
1
250mA
F1
2
1N4004
D1, D3
1
LED
D2
1
100u
C1
1
100pF
C2
1
100n
C3
1
3.3u
C4
1
22k
R1
1
330k
R2
1
220k
R3
1
10k
R4
1
470
R5
2
4.7k
R6, R8
Show 1 more
QtyPartRefs
1
33k
R7

BatteryMonitorVeroboard design files

The KiCad project lives in the jgOhYeah/Farm-PJON-LoRa-network repository on GitHub; these links point at the commit this page was built from.

BatteryMonitorVeroboard: common questions

How big is the BatteryMonitorVeroboard PCB?

The BatteryMonitorVeroboard measures 100 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BatteryMonitorVeroboard?

23 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the BatteryMonitorVeroboard design files?

From the jgOhYeah/Farm-PJON-LoRa-network repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the BatteryMonitorVeroboard design in my own project?

Yes, under the terms of its MIT license, which jgOhYeah chose for the repository.

More boards in Farm-PJON-LoRa-network

Similar boards