MDS
jguo22·MDS·raven/pcb/raven.kicad_pcb
About the MDS PCB
MDS is an open source STM32 PCB design by jguo22, published on GitHub. It is a 4-layer board measuring 63.2 × 54.2 mm, with 180 components from 44 distinct parts.
Its main chip is the STM32G431CBUX, from the STM32 family. Other key parts include the DRV8874PWPR, ICM-42688-P, QMC5883L, 74HC595 and TPS548B28RWWR. By type, the board carries 67 capacitors, 54 resistors, 24 connectors, 17 diodes, 10 ICs and 2 transistors.
It belongs with the robotics & motion designs in this gallery.
Main components on the MDS
MDS bill of materials (BOM)
180 components, 44 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | DRV8874PWPR | HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm | U1, U4, U5, U6, U30 |
| 1 | ICM-42688-P | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U2 |
| 1 | QMC5883L | LGA-16_3x3mm_P0.5mm | U3 |
| 1 | STM32G431CBUX STM32G431CBUx | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U7 |
| 1 | 74HC595 | SOIC-16_3.9x9.9mm_P1.27mm | U8 |
| 1 | TPS548B28RWWR | TPS548B28RWWR | U9 |
| 1 | AO3400A | SOT-23 | Q1 |
| 1 | DMP2002UPS | DMP2002UPS | Q3 |
| 1 | 16MHZ 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_02x20_Odd_Even | PinSocket_2x20_P2.54mm_Vertical | J1 |
| 2 | CONN_01X04_MOUNTINGPIN Conn_01x04_MountingPin | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2, J5 |
| 1 | Conn_01x02_Pin | AMASS_XT30UPB-M_1x02_P5.0mm_Vertical | J3 |
| 5 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J4, J6, J7, J8, J9 |
| 1 | Conn_01x02_Pin | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J11 |
| 5 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J14, J15, J16, J17, J18 |
| 5 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J20, J26, J27, J28, J29 |
| 4 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J21, J22, J23, J24 |
| 1 | C2838917 Fuse | Fuse_1206_3216Metric | F1 |
| 2 | SW_Push | TS-1088 | SW1, SW2 |
| 7 | C72043 GLED | LED_0603_1608Metric | D1, D3, D6, D9, D12, D14, D27 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | C2290 WLED | LED_0603_1608Metric | D2, D5, D8, D11, D26 |
| 5 | C2286 RLED | LED_0603_1608Metric | D4, D7, D10, D13, D28 |
| 1 | C1017 FerriteBead | L_0805_2012Metric | FB1 |
| 1 | 1u | L_0660A | L1 |
| 1 | 100U 100u | C_Elec_8x6.2 | C1 |
| 20 | 100N 100n | C_0402_1005Metric | C2, C4, C7, C8, C10, C14, C16, C18 +12 |
| 7 | 2U2 2u2 | C_0402_1005Metric | C3, C6, C9, C15, C20, C25, C67 |
| 5 | 22N 22n | C_0402_1005Metric | C5, C17, C22, C27, C69 |
| 2 | 220N 220n | C_0402_1005Metric | C11, C44 |
| 1 | 4U7 4u7 | C_0603_1608Metric | C12 |
| 15 | 22U 22u | C_0805_2012Metric | C13, C50, C51, C52, C53, C54, C57, C58 +7 |
| 1 | 100N 100n | C_0603_1608Metric | C23 |
| 1 | 10U 10u | C_0603_1608Metric | C28 |
| 2 | 12P 12p | C_0402_1005Metric | C32, C33 |
| 6 | 1u | C_0402_1005Metric | C37, C38, C46, C47, C48, C49 |
| 4 | 47U 47u | C_1206_3216Metric | C40, C41, C42, C43 |
| 1 | 2U2 2u2 | C_0805_2012Metric | C45 |
| 1 | 10U 10u | C_0402_1005Metric | C55 |
| 28 | 1k | R_0402_1005Metric | R1, R2, R3, R4, R5, R6, R9, R10 +20 |
| 21 | 7K5 7k5 | R_0402_1005Metric | R7, R8, R25, R26, R28, R29, R31, R33 +13 |
| 1 | 33K 33k | R_0402_1005Metric | R24 |
| 2 | 56K 56k | R_0402_1005Metric | R53, R57 |
| 1 | 47K 47k | R_0402_1005Metric | R56 |
| 1 | 100K 100k | R_0402_1005Metric | R58 |
MDS design files
The KiCad project lives in the jguo22/MDS repository on GitHub; these links point at the commit this page was built from.
MDS: common questions
What microcontroller does the MDS use?
The MDS is built around the STM32G431CBUX, from the STM32 family.
How big is the MDS PCB?
The MDS measures 63.2 × 54.2 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the MDS?
180 components, from 44 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MDS design files?
From the jguo22/MDS repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MDS design in my own project?
The repository has no license, so all rights stay with jguo22. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MDS without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k