29 open source boards using the DRV8874PWPR
Real designs built with the DRV8874PWPR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
EX-MotorShield8874
DCC-EX
65.9 × 52.9 mm75 parts4LCERN-OHL-W-2.012ESP32
SUMEC MK IV
bismarx-v1
80 × 45 mm84 parts4LNo license5Motor shield
semify-eda
65.9 × 52.9 mm80 parts4LNo license5STM32
Maslab
maslab-5
99.1 × 99.1 mm317 parts4LNo license4ESP32
Soft-Robotics
esb8
49.9 × 47.3 mm84 parts4LCustom license4ESP32
SUMEC MK V Pro
bismarx-v1
97 × 37.5 mm120 parts4LNo license3Sourccey electrical
vulcan-forge
112 × 98 mm144 parts2LCERN-OHL-S-2.02STM32
Robotont electronics mainboard
robotont
304.3 × 274 mm407 parts2LNo license1STM32
Int brain stm32
eccentricOrange
170.2 × 79 mm213 parts4LNo license0ESP32
Main routed
0x63616c
54 × 71 mm194 parts4LNo license0STM32
MDS
jguo22
63.2 × 54.2 mm180 parts4LNo license0RP2040/RP2350
XDuinoRail-Debug
chatelao
99.1 × 99 mm147 parts2LAGPL-3.00STM32
CANSAT ARLISS STM32
JosephPalacios-so
90 × 75 mm110 parts4LNo license0STM32
Integrated motor controller
kgieselman
85 × 54 mm107 parts4LCERN-OHL-S-2.00Motor channel
alexchunlin
50 × 40 mm49 parts4LNo license0STM32
Motor controller
mohamed-belal-10
92.1 × 62.8 mm49 parts4LMIT0Dc motor driver
ROAR-QUTRC
94 × 100 mm70 parts2LNo license10ESP32
Sumec
bismarx-v1
95 × 55 mm54 parts2LNo license5ESP32
SUMEC MK V
bismarx-v1
97 × 37.5 mm100 parts4LNo license3ESP32
Main test
0x63616c
54 × 71 mm194 parts4LNo license0Motor1
alexchunlin
50 × 40 mm44 parts4LNo license0ESP32
SUMEC MK IV
bismarx-v1
80 × 45 mm84 parts4LNo license3ESP32
Controller test
0x63616c
61 parts2LNo license0Rung2 motor
alexchunlin
50 × 40 mm41 parts4LNo license0ESP32
Sumec
bismarx-v1
95 × 55 mm54 parts2LNo license3Front panel motor eval
birdybro
80 × 48 mm36 parts4LGPL-3.00DRV BREAKOUT BOARD
bismarx-v1
18.8 × 21.4 mm3 parts2LNo license5ESP32
XDuinoRailControl
chatelao
48.3 × 40.6 mm16 parts2LAGPL-3.00XDuinoRail-Breakout-DRV8874
chatelao
29.8 × 17.8 mm13 parts2LAGPL-3.00
How designs wire the DRV8874PWPR
Read from the KiCad layouts of 18 open source designs, one per repository: what each pin of the DRV8874PWPR connects to, and the resistors, capacitors and other passives placed on it.
- The CPH pin has a series capacitor on 17 of 18 designs, most often 22 nF (then 33 nF).
- The CPL pin has a series capacitor on 17 of 18 designs, most often 22 nF (then 33 nF).
- The VM pin has a decoupling capacitor on 15 of 18 designs, most often 100 nF (then 10 µF).
- The IPROPI pin has a resistor to GND on 12 of 18 designs, most often 1.3 kΩ (then 4.7 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NFAULTpin 4 | Connected to: The microcontroller 33%, a connector 22% |
|
| VREFpin 5 | Connected to: Signal 50% · 3.3V 44% |
|
| IPROPIpin 6 | Connected to: The microcontroller 39% |
|
| IMODEpin 7 | Connected to: Signal 44% · not connected 17% · GND 39% |
|
| PGNDpin 9 | Connected to: GND 89% | — |
| VMpin 11 | Connected to: 12V 67% · a signal 33% |
|
| VCPpin 12 | Connected to: Signal 100% |
|
| CPHpin 13 | Connected to: Signal 100% |
|
| CPLpin 14 | Connected to: Signal 100% |
|
| GNDpin 15 | Connected to: GND 94% | — |
| EPpin 17 | Connected to: GND 94% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include EX-MotorShield8874 by DCC-EX, Dc motor driver by ROAR-QUTRC, DRV BREAKOUT BOARD by bismarx-v1 and Motor shield by semify-eda.
The DRV8874PWPR in open source designs
The gallery holds 29 open source boards using the DRV8874PWPR from 18 GitHub repositories; a typical one measures about 80 × 53.5 mm and carries around 84 components.
66% use four copper layers or more, and 28% carry an open source license.
The most starred is EX-MotorShield8874 by DCC-EX.
Parts used alongside the DRV8874PWPR
Microcontrollers on boards using the DRV8874PWPR
What boards using the DRV8874PWPR are built for
DRV8874PWPR: common questions
Where can I find a DRV8874PWPR reference design?
Each of the 29 boards on this page is a real design using the DRV8874PWPR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the DRV8874PWPR CPH pin connected?
The CPH pin has a series capacitor on 17 of 18 designs, most often 22 nF (then 33 nF). Counted from the KiCad layouts of 18 open source designs using the DRV8874PWPR.
How is the DRV8874PWPR CPL pin connected?
The CPL pin has a series capacitor on 17 of 18 designs, most often 22 nF (then 33 nF). Counted from the KiCad layouts of 18 open source designs using the DRV8874PWPR.
What decoupling capacitors do designs use on the DRV8874PWPR VM pin?
The VM pin has a decoupling capacitor on 15 of 18 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 18 open source designs using the DRV8874PWPR.
What parts are used alongside the DRV8874PWPR?
The AMS1117-3.3, USBLC6-2SC6, 74HC04, 74HC08 and 74HC32 appear in the most repositories here.
Which microcontrollers do boards using the DRV8874PWPR use?
Most are built on ESP32 (11), STM32 (7) and RP2040/RP2350 (1).
How big is a typical board using the DRV8874PWPR?
The median is 80 × 53.5 mm, and 34% are two-layer designs.
What is the most popular open source board using the DRV8874PWPR?
By GitHub stars, EX-MotorShield8874 by DCC-EX, with 12 stars.
Can I simulate one of these boards using the DRV8874PWPR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.