Keynjector
jhagmar·keynjector·hw/keynjector/keynjector.kicad_pcb
About the Keynjector PCB
Keynjector is an open source Microchip SAM PCB design by jhagmar, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 36 × 42.7 mm, with 44 components from 20 distinct parts.
Its main chip is the ATSAM4S8BA-ANR, from the Microchip SAM family. Other key parts include the PRTR5V0U2X, SPX3819M5-L/TR and ADS7843. By type, the board carries 22 capacitors, 7 resistors, 5 test points, 4 ICs, 4 connectors and 1 switch.
From the project
There are several bad solutions to managing passwords securely, e.g.,
There are several bad solutions to managing passwords securely, e.g.,
1) Having the same (easy to guess) password for every account 2) Keeping your passwords on a Post-It under your keyboard 3) Using a password manager on your computer
You might be surprised that item 3 made the list, but password managers keep all passwords in a file encrypted with a master password. When the user retrieves a password, all other passwords are decrypted and exposed in RAM, in an environment with dozens of other, potentially malicious, processes with internet access. Password managing software often use…
Main components on the Keynjector
Keynjector bill of materials (BOM)
44 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PRTR5V0U2X | SOT143B | U1 |
| 1 | SPX3819M5-L/TR | SOT-23-5 | U2 |
| 1 | ATSAM4S8BA-ANR | LQFP64 | U3 |
| 1 | ADS7843 | SSOP-16 | U4 |
| 1 | 10118192-0001LF | 10118192 | J1 |
| 1 | M50-3600542 | M50-3600542 | J2 |
| 1 | FH12A-40S-0.5SH(55) | FH12A-40S-0.5SH(55) | J3 |
| 1 | 492250821 | 492250821 | J4 |
| 1 | EVQ-P7L01P | EVQP7L01P | SW1 |
| 5 | TP | TP | TP1, TP2, TP3, TP4, TP5 |
| 1 | 7A-12.000MAAJ-T | 7A-12.000MAAJ-T | XC1 |
| 1 | 10u | 1206_10uF | C1 |
| 14 | 100n | 0805 | C2, C3, C6, C7, C8, C9, C10, C11 +6 |
| 4 | 10u | 0805 | C4, C16, C20, C21 |
| 1 | 2.2u | 1206_2.2uF | C5 |
| 2 | 15p | 0805 | C14, C15 |
| 1 | 56k | 0805 | R1 |
| 1 | 36k | 0805 | R2 |
| 3 | 39R | 0805 | R3, R4, R6 |
| 2 | 10k | 0805 | R5, R8 |
Keynjector design files
The KiCad project lives in the jhagmar/keynjector repository on GitHub; these links point at the commit this page was built from.
Keynjector: common questions
What microcontroller does the Keynjector use?
The Keynjector is built around the ATSAM4S8BA-ANR, from the Microchip SAM family.
How big is the Keynjector PCB?
The Keynjector measures 36 × 42.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Keynjector?
44 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Keynjector design files?
From the jhagmar/keynjector repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Keynjector design in my own project?
Yes, under the terms of its GPL-2.0 license, which jhagmar chose for the repository.
Can I test firmware for the Keynjector without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
More boards in keynjector
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416