BaderVGA

jimbro1000·BaderVGA

BaderVGA PCB layout, top view — open source board by jimbro1000

About the BaderVGA PCB

BaderVGA is an open source PCB design by jimbro1000, published on GitHub. It is a 4-layer board measuring 139.3 × 102.4 mm, with 48 components from 19 distinct parts.

Other key parts include the 27C010, 74HC245, 74LS00, 74LS30 and CD74HC4040. By type, the board carries 17 ICs, 15 connectors, 10 capacitors, 3 resistors, 1 crystal and 1 jumper.

From the project

prototype very bad vga for SBC6309

Inspired by Ben Eater's discrete logic VGA and Leoneq's "bad vga" design, this project implements a very basic, text only VGA display using just 1 bit of a 128KB EEPROM data bus and 2KB of SRAM.

The logic chips used are clocked to near their limit (notably the 12-bit counters) and struggle to meet the timing requirements of the design. Careful selection of components should help to resolve this.

BaderVGA, from the project README
From the project README

Main components on the BaderVGA

BaderVGA bill of materials (BOM)

48 components, 19 distinct parts.

QtyPartRefs
1
27C010
U1
2
74HC245
U2, U8
3
74LS00
U3, U16, U20
5
74LS30
U7, U14, U15, U18, U19
2
CD74HC4040
U11, U17
2
74LS20
U12, U13
1
IDT71342
U21
1
GAL16V8
U22
1
TFT660
Y1
1
VGA
J1
2
Conn_01x06
J2, J8
2
Conn_01x16
J3, J16
8
Conn_01x08
J4, J5, J7, J9, J12, J13, J14, J15
2
Conn_01x04
J6, J10
1
ZWORKA
JP1
1
SW_DIP_x04
SW1
10
10nF
C1, C2, C3, C4, C5, C6, C7, C8 +2
2
10K
R3, R4
1
1K
R5

BaderVGA design files

The KiCad project lives in the jimbro1000/BaderVGA repository on GitHub; these links point at the commit this page was built from.

BaderVGA: common questions

How big is the BaderVGA PCB?

The BaderVGA measures 139.3 × 102.4 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the BaderVGA?

48 components, from 19 distinct parts. The full bill of materials is listed on this page.

Where can I download the BaderVGA design files?

From the jimbro1000/BaderVGA repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the BaderVGA design in my own project?

The repository has no license, so all rights stay with jimbro1000. Use it as a reference, and ask the author before reusing the design.