DragonDiscController
jimbro1000·DragonDiscController
About the DragonDiscController PCB
DragonDiscController is an open source PCB design by jimbro1000, published on GitHub under the MIT license. It is a 2-layer board measuring 107.5 × 80.3 mm, with 28 components from 24 distinct parts.
Other key parts include the 27C64, WD2797, 74HCT174, 74HCT139 and 74HCT00. By type, the board carries 9 ICs, 7 resistors, 4 capacitors, 3 connectors, 3 test points and 1 crystal.
From the project
Recreation of DragonDos disc controller cartridge
This project contains the design and build documents for a recreation of the DragonDos disc controller
The schematics use a WDC WD2797 disc controller IC as the core of the board, this is consistent with the original DragonData design. Other 2797 ICs from different manufacturers should still work
Other than the rom and controller the discrete logic chips are surface mount to help with the availability of components. In all cases the surface mount parts are of the largest versions available to try and make the assembly of the board feasible for hand soldering

Main components on the DragonDiscController
DragonDiscController bill of materials (BOM)
28 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 27C64 | DIP-28_W15.24mm | U1 |
| 1 | WD2797 | DIP-40_W15.24mm | U2 |
| 1 | 74HCT174 | SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | 74HCT139 | SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | 74HCT00 | SOIC-14_3.9x8.7mm_P1.27mm | U5 |
| 1 | 74LS06 | SOIC-14_3.9x8.7mm_P1.27mm | U6 |
| 1 | 74LS07 | SOIC-14_3.9x8.7mm_P1.27mm | U7 |
| 1 | 74HCT74 | SOIC-14_3.9x8.7mm_P1.27mm | U8 |
| 1 | 74HCT04 | SOIC-14_3.9x8.7mm_P1.27mm | U9 |
| 1 | 4MHz | Crystal_HC18-U_Vertical | Y1 |
| 1 | ~{TEST} | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | J1 |
| 1 | IDC_Floppy | IDC-Header_2x17_P2.54mm_Latch_Horizontal | J2 |
| 1 | ~{MR} | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | J4 |
| 1 | TestPoint_WD | TestPoint_Loop_D2.50mm_Drill1.0mm | TP1 |
| 1 | TestPoint_TG43 | TestPoint_Loop_D2.50mm_Drill1.0mm | TP2 |
| 1 | TestPoint_Probe | TestPoint_Loop_D2.50mm_Drill1.0mm | TP3 |
| 1 | 1N4148 | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | 22pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 220nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 5.5-65pf | Trimmer-10mm | C3 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 4 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R8 |
| 2 | 10K | Potentiometer_Bourns_3296Y_Vertical | R9, R10 |
| 1 | 220R | R_Array_SIP6 | RN1 |
DragonDiscController design files
The KiCad project lives in the jimbro1000/DragonDiscController repository on GitHub; these links point at the commit this page was built from.
- Layoutd32_disk_controller.kicad_pcb
- Schematicd32_disk_controller.kicad_sch
DragonDiscController: common questions
How big is the DragonDiscController PCB?
The DragonDiscController measures 107.5 × 80.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DragonDiscController?
28 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the DragonDiscController design files?
From the jimbro1000/DragonDiscController repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DragonDiscController design in my own project?
Yes, under the terms of its MIT license, which jimbro1000 chose for the repository.