8 open source boards using the 74HCT174
Real designs built with the 74HCT174, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Amiga-N2630
jasonsbeer
318.4 × 124.5 mm231 parts4LNo license69Flock
skiselev
99.1 × 49.9 mm25 parts2LNo license19Rosco 6502
rosco-6502
100 × 100 mm55 parts4LMIT8Rc-640k
PickledDog
99.1 × 49.9 mm11 parts2LApache-2.03SVI-2017
patricklaf
100 × 100 mm40 parts2LNo license2Rc-1024k
PickledDog
99.1 × 49.9 mm13 parts2LApache-2.02Rc-256page
PickledDog
99.1 × 49.9 mm12 parts2LApache-2.02DragonDiscController
jimbro1000
107.5 × 80.3 mm28 parts2LMIT1
How designs wire the 74HCT174
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 74HCT174 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 470 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 8 | Connected to: GND 100% | — |
| VCCpin 16 | Connected to: 5V 100% |
|
14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Amiga-N2630 by jasonsbeer, Flock by skiselev, Rosco 6502 by rosco-6502 and Rc-640k by PickledDog.
The 74HCT174 in open source designs
The gallery holds 8 open source boards using the 74HCT174 from 8 GitHub repositories; a typical one measures about 99.6 × 65.1 mm and carries around 27 components.
75% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.
The most starred is Amiga-N2630 by jasonsbeer.
Parts used alongside the 74HCT174
What boards using the 74HCT174 are built for
74HCT174: common questions
Where can I find a 74HCT174 reference design?
Each of the 8 boards on this page is a real design using the 74HCT174. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HCT174 VCC pin?
The VCC pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 470 µF). Counted from the KiCad layouts of 8 open source designs using the 74HCT174.
What parts are used alongside the 74HCT174?
The 74HCT32, 74HCT138, 74LS07, AS6C1008 and SST39SF040 appear in the most repositories here.
How big is a typical board using the 74HCT174?
The median is 99.6 × 65.1 mm, and 75% are two-layer designs.
What is the most popular open source board using the 74HCT174?
By GitHub stars, Amiga-N2630 by jasonsbeer, with 69 stars.
Can I simulate one of these boards using the 74HCT174 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.