22 open source boards using the 74HCT139
Real designs built with the 74HCT139, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
8bit computer
vascofazza
297.2 × 180.3 mm327 parts2LMIT314LittleSixteen
SukkoPera
389 × 136.2 mm329 parts2LCustom license76MSX ONE
jdgabbard
200 × 150 mm107 parts2LGPL-3.028ISA EMS 2Mb
hkzlab
104.1 × 102.9 mm41 parts2LCC-BY-NC-4.0232FISC
DoctorWkt
214.6 × 123.2 mm73 parts2LGPL-3.010FISC
DoctorWkt
231.3 × 96.5 mm59 parts2LGPL-3.07SST-6809-V2.2
KenWillmott
100 × 100 mm46 parts4LMIT1DragonDiscController
jimbro1000
107.5 × 80.3 mm28 parts2LMIT1AVR/Arduino
8bit computer
saktheeswaranswan
297.2 × 180.3 mm327 parts2LMIT0RP2040/RP2350
All in one smc
nojan1
161.1 × 82.9 mm146 parts4LNo license0AVR/Arduino
Z80ctrl
jblang
99.8 × 49.9 mm30 parts2LMIT738-bit computer Input Module
xrayer2000
106 parts2LCC-BY-NC-4.030BeebSCSI - Master Cartridge Adapter
Domesday86
81.3 × 104.4 mm12 parts2LNo license29Genesis advanced flash 1-1
MouseBiteLabs
83.8 × 61 mm42 parts2LCC-BY-SA-4.016MUTIF-1613 CPU Board
ja1umi
155 × 114 mm58 parts2LMIT3P8x regbank card
ksr
280 × 140 mm95 parts4LNo license0Genesis advanced flash 1-2
MouseBiteLabs
83.8 × 61 mm42 parts2LCC-BY-SA-4.016Main board
nojan1
230 × 100 mm74 parts4LNo license0Z80-IDE
dennis9819
160 × 100.3 mm62 parts2LNo license2Uart
nojan1
100 × 100 mm53 parts4LNo license08-bit computer Keypad Module
xrayer2000
100.3 × 95.3 mm28 parts2LCC-BY-NC-4.030Z80-SID
dennis9819
160 × 100.3 mm62 parts2LNo license2
How designs wire the 74HCT139
Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the 74HCT139 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 8 of 17 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 8 | Connected to: GND 88% | — |
| VCCpin 16 | Connected to: VCC 88% |
|
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 8bit computer by vascofazza, LittleSixteen by SukkoPera, Z80ctrl by jblang and 8-bit computer Keypad Module by xrayer2000.
The 74HCT139 in open source designs
The gallery holds 22 open source boards using the 74HCT139 from 17 GitHub repositories; a typical one measures about 160 × 100.3 mm and carries around 61 components.
77% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is 8bit computer by vascofazza.
Parts used alongside the 74HCT139
Microcontrollers on boards using the 74HCT139
What boards using the 74HCT139 are built for
74HCT139: common questions
Where can I find a 74HCT139 reference design?
Each of the 22 boards on this page is a real design using the 74HCT139. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HCT139 VCC pin?
The VCC pin has a decoupling capacitor on 8 of 17 designs, most often 100 nF. Counted from the KiCad layouts of 17 open source designs using the 74HCT139.
What parts are used alongside the 74HCT139?
The 74HCT138, 74HCT00, 74HCT04, 74HCT08 and 74HCT32 appear in the most repositories here.
Which microcontrollers do boards using the 74HCT139 use?
Most are built on AVR/Arduino (3) and RP2040/RP2350 (1).
How big is a typical board using the 74HCT139?
The median is 160 × 100.3 mm, and 77% are two-layer designs.
What is the most popular open source board using the 74HCT139?
By GitHub stars, 8bit computer by vascofazza, with 314 stars.
Can I simulate one of these boards using the 74HCT139 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.