51 open source boards using the 74LS06
Real designs built with the 74LS06, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
68000
jefftranter
134.6 × 208.3 mm90 parts2LNo license132RP2040/RP2350
Kerberos
FrankBuss
62.5 × 83.8 mm167 parts4LNo license82LittleSixteen
SukkoPera
389 × 136.2 mm329 parts2LCustom license76Multicomp6809
nealcrook
170 × 145 mm115 parts2LNo license63PIC
.C68
ProbablyNotArtyom
214 × 170 mm184 parts4LGPL-2.051LanguageCard
btb
100 × 77.5 mm37 parts2LApache-2.044AVR/Arduino
OtterX
RetroRemake
170.1 × 170.1 mm168 parts4LCERN-OHL-W-2.040HEC-Model-Z1
Andy18650
243.8 × 170.2 mm113 parts4LGPL-3.036Z80VDP1B
lynchaj
100 × 100 mm93 parts2LNo license31Yddraig
ddraig68k
340 × 210 mm214 parts4LMIT29Plusd
alvaroalea
99.1 × 99.1 mm58 parts2LNo license24UMMF
nils-eilers
105 × 100 mm63 parts2LNo license10TIM-011B
Board-Folk
232.8 × 204.2 mm149 parts2LNo license8Betadisk clone
alvaroalea
99.7 × 149.9 mm83 parts2LNo license7PIC
TELESTRAT II
Fred72z
170 × 170 mm149 parts2LGPL-2.05NXP
LFlex21
laurent-fr
180.3 × 120.7 mm77 parts2LNo license4Rl78-flash programmer
prabhu-yu
119.9 × 24.9 mm22 parts2LNo license46809PC
danwerner21
244 × 244 mm155 parts2LNo license2RP2040/RP2350
SORD M68 USB Keyboard Converter
tsunozemichan
130.8 × 62.2 mm46 parts2LNo license2FloppyBird
inmbolmie
88.9 × 59.7 mm25 parts2LGPL-3.026502PC
danwerner21
244 × 244 mm154 parts2LNo license1M6809-multicomputer
cartheur
170 × 145 mm111 parts2LMIT1Raspberry Pi
RTE-for-RPI-Schematics
3mdeb
104 × 57.9 mm31 parts2LCERN-OHL-1.21DragonDiscController
jimbro1000
107.5 × 80.3 mm28 parts2LMIT1OPD-Computer-One-Disk-Interface
stephen-usher
82 × 76 mm22 parts2LCC0-1.01Trs80-m1-drive monitor
xtracool
139.7 × 127 mm43 parts2LMIT0AVR/Arduino
XUM-1541
Beaupre-Circuit-Design
60 × 60 mm15 parts2LMIT0PIC
Copy
ProbablyNotArtyom
214 × 170 mm184 parts4LGPL-2.051Z80VDP1A
lynchaj
100 × 100 mm90 parts2LNo license31Plusd no route
alvaroalea
106.7 × 83.8 mm47 parts2LNo license24Lomax Thunder 186 Redux
RichCini
253.6 × 137.7 mm116 parts4LNo license1Interface01
tsunozemichan
75.5 × 91.8 mm31 parts2LNo license1P2000t joystick slot2
ifilot
33.4 × 0 mm26 parts2LNo license1OPD-Computer-One-Disk-Interface-Prerouting
stephen-usher
82 × 76 mm22 parts2LCC0-1.01Fdc01
felge1966
170.2 × 96.5 mm40 parts2LAGPL-3.00Situacion1
alvaroalea
188 × 153.7 mm45 parts2LNo license24
How designs wire the 74LS06
Read from the KiCad layouts of 36 open source designs, one per repository: what each pin of the 74LS06 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 19 of 36 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 97% | — |
| VCCpin 14 | Connected to: 5V 97% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 68000 by jefftranter, Kerberos by FrankBuss, FAL6567i by robfinch and LittleSixteen by SukkoPera.
The 74LS06 in open source designs
The gallery holds 51 open source boards using the 74LS06 from 37 GitHub repositories; a typical one measures about 105 × 100 mm and carries around 58 components.
86% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is 68000 by jefftranter.
Parts used alongside the 74LS06
Microcontrollers on boards using the 74LS06
What boards using the 74LS06 are built for
74LS06: common questions
Where can I find a 74LS06 reference design?
Each of the 51 boards on this page is a real design using the 74LS06. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS06 VCC pin?
The VCC pin has a decoupling capacitor on 19 of 36 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 36 open source designs using the 74LS06.
What parts are used alongside the 74LS06?
The 74LS32, 74LS04, 74LS08, 74LS245 and 74LS74 appear in the most repositories here.
Which microcontrollers do boards using the 74LS06 use?
Most are built on AVR/Arduino (3), PIC (3), RP2040/RP2350 (2) and NXP (1).
How big is a typical board using the 74LS06?
The median is 105 × 100 mm, and 86% are two-layer designs.
What is the most popular open source board using the 74LS06?
By GitHub stars, 68000 by jefftranter, with 132 stars.
Can I simulate one of these boards using the 74LS06 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.