Solar USB Buck Converter
jiroegbu-eng·Solar_USB_Buck_Converter
About the Solar USB Buck Converter PCB
Solar USB Buck Converter is an open source PCB design by jiroegbu-eng, published on GitHub. It is a 2-layer board measuring 99.9 × 46.5 mm, with 11 components from 9 distinct parts.
Other key parts include the LM2596S-ADJ. By type, the board carries 4 capacitors, 2 connectors, 2 resistors, 1 IC, 1 diode and 1 inductor.
It belongs with the power & battery and iot & wireless designs in this gallery.
From the project
KiCad PCB design for a 12–20V solar-input to 5V USB buck converter using LM2596S-ADJ.
This project is a KiCad PCB design for a solar-powered buck converter that steps down a 12–20V DC solar input to a 5V USB output. The goal was to design a compact power board that could support off-grid IoT devices, sensor nodes, and small embedded electronics.
The project was built as part of my EDA portfolio to practice switch-mode power supply layout, component placement, PCB routing, ground pours, and clean design-rule validation.

Main components on the Solar USB Buck Converter
Solar USB Buck Converter bill of materials (BOM)
11 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM2596S-ADJ | TO-263-5_TabPin3 | U1 |
| 1 | Solar Input 12-20V | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | USB_A | USB_A_Receptacle_GCT_USB1046 | J2 |
| 1 | SS34 | D_SMA | D1 |
| 1 | 100µH | L_Radial_D10.0mm_P5.00mm_Fastron_07M | L1 |
| 2 | 220µF | CP_Radial_D6.3mm_P2.50mm | C1, C3 |
| 2 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C4 |
| 1 | 1kΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 3.1kΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
Solar USB Buck Converter design files
The KiCad project lives in the jiroegbu-eng/Solar_USB_Buck_Converter repository on GitHub; these links point at the commit this page was built from.
Solar USB Buck Converter: common questions
How big is the Solar USB Buck Converter PCB?
The Solar USB Buck Converter measures 99.9 × 46.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Solar USB Buck Converter?
11 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Solar USB Buck Converter design files?
From the jiroegbu-eng/Solar_USB_Buck_Converter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Solar USB Buck Converter design in my own project?
The repository has no license, so all rights stay with jiroegbu-eng. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k