Jlink to TC2030-IDC microchip adapter

JitterCompany·debug-tools·JLink-to-TC2030-IDC__microchip/JLink-to-TC2030-IDC__microchip.kicad_pcb

Jlink to TC2030-IDC microchip adapter PCB layout, top view — open source board by JitterCompany

About the Jlink to TC2030-IDC microchip adapter PCB

Jlink to TC2030-IDC microchip adapter is an open source PCB design by JitterCompany, published on GitHub under the MIT license. It is a 2-layer board measuring 27.4 × 26 mm, with 5 components from 5 distinct parts.

By type, the board carries 3 connectors, 1 switch and 1 resistor.

From the project

Collection of useful utility PCBs for development purposes

KiCad projects for the small debug, programming and test boards used across Jitter projects. Each board has its own folder; manufacturing files are in production/.

Most Jitter boards expose a single 6-pin Würth REDFIT IDC SKEDD footprint that carries both SWD and a UART. SKEDD connectors press straight into plated holes, so the target board needs no mating connector. The adapters below convert a debug probe's native header to that 6-pin cable.

Jlink to TC2030-IDC microchip adapter bill of materials (BOM)

5 components, 5 distinct parts.

QtyPartRefs
1
BHR-06-VUA
Conn_02x10_Odd_Even
J1
1
Conn_02x10_Odd_Even
J2
1
uart_host_2.54
J3
1
Reset
SW1
1
10k
R1

Jlink to TC2030-IDC microchip adapter design files

The KiCad project lives in the JitterCompany/debug-tools repository on GitHub; these links point at the commit this page was built from.

Jlink to TC2030-IDC microchip adapter: common questions

How big is the Jlink to TC2030-IDC microchip adapter PCB?

The Jlink to TC2030-IDC microchip adapter measures 27.4 × 26 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Jlink to TC2030-IDC microchip adapter?

5 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Jlink to TC2030-IDC microchip adapter design files?

From the JitterCompany/debug-tools repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Jlink to TC2030-IDC microchip adapter design in my own project?

Yes, under the terms of its MIT license, which JitterCompany chose for the repository.

More boards in debug-tools