USBSwitch
JitterCompany·debug-tools·USBSwitch/USBSwitch/USBSwitch.kicad_pcb
About the USBSwitch PCB
USBSwitch is an open source PCB design by JitterCompany, published on GitHub under the MIT license. It is a 2-layer board measuring 41 × 40 mm, with 13 components from 7 distinct parts.
By type, the board carries 4 connectors, 3 jumpers, 3 diodes and 3 resistors.
From the project
Collection of useful utility PCBs for development purposes
KiCad projects for the small debug, programming and test boards used across Jitter projects. Each board has its own folder; manufacturing files are in production/.
Most Jitter boards expose a single 6-pin Würth REDFIT IDC SKEDD footprint that carries both SWD and a UART. SKEDD connectors press straight into plated holes, so the target board needs no mating connector. The adapters below convert a debug probe's native header to that 6-pin cable.
USBSwitch bill of materials (BOM)
13 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x01_Female | CT3149_Banana_Jack_4mm | J1, J2 |
| 1 | USB_A | USB_A_Wuerth_61400416021_Horizontal | J3 |
| 1 | USB_B_Micro | USB_Micro-B_Wuerth_629105150521 | J4 |
| 1 | Jumper_NC_Dual | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 2 | Jumper | PinHeader_1x02_P2.54mm_Vertical | JP2, JP3 |
| 3 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3 |
| 3 | 220 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3 |
USBSwitch design files
The KiCad project lives in the JitterCompany/debug-tools repository on GitHub; these links point at the commit this page was built from.
USBSwitch: common questions
How big is the USBSwitch PCB?
The USBSwitch measures 41 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USBSwitch?
13 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the USBSwitch design files?
From the JitterCompany/debug-tools repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the USBSwitch design in my own project?
Yes, under the terms of its MIT license, which JitterCompany chose for the repository.
More boards in debug-tools
STM32
SL23 modem tester
JitterCompany
120 × 107 mm195 parts4LMIT0JLink-REDfit adapter
JitterCompany
27.4 × 26 mm5 parts2LMIT0Jlink to TC2030-IDC microchip adapter
JitterCompany
27.4 × 26 mm5 parts2LMIT0BMP-REDFit adapter
JitterCompany
22.9 × 16.5 mm4 parts2LMIT0HSprobe-REDFit adapter
JitterCompany
25 × 18 mm3 parts2LMIT0JTAG-SWD
JitterCompany
16.5 × 12.7 mm3 parts2LMIT0