Breadboard power supply
JKpro-file·Breadboard_power_supply
About the Breadboard power supply PCB
Breadboard power supply is an open source PCB design by JKpro-file, published on GitHub. It is a 2-layer board measuring 51.4 × 30.8 mm, with 17 components from 11 distinct parts.
Other key parts include the LM78M05_TO220 and LM317_TO-220. By type, the board carries 7 connectors, 3 capacitors, 3 resistors, 2 ICs, 1 switch and 1 diode.
It belongs with the dev boards & breakouts and power & battery designs in this gallery.
Main components on the Breadboard power supply
Breadboard power supply bill of materials (BOM)
17 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM78M05_TO220 | TO-220-3_Vertical | U1 |
| 1 | LM317_TO-220 | TO-220-3_Vertical | U2 |
| 1 | Barrel_Jack_Switch | BarrelJack_Horizontal | J1 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J2, J7 |
| 2 | Conn_01x03_Pin | PinHeader_1x03_P1.27mm_Vertical | J3, J4 |
| 2 | Conn_01x02_Pin | PinHeader_1x02_P1.27mm_Vertical | J5, J6 |
| 1 | EG1218 E-Switch | Switch_Slide_11.6x4mm_EG1218 | S1 |
| 1 | LED | LED_D3.0mm | D1 |
| 3 | C | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3 |
| 2 | 560R | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R3 |
| 1 | 330R | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
Breadboard power supply design files
The KiCad project lives in the JKpro-file/Breadboard_power_supply repository on GitHub; these links point at the commit this page was built from.
Breadboard power supply: common questions
How big is the Breadboard power supply PCB?
The Breadboard power supply measures 51.4 × 30.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Breadboard power supply?
17 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Breadboard power supply design files?
From the JKpro-file/Breadboard_power_supply repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Breadboard power supply design in my own project?
The repository has no license, so all rights stay with JKpro-file. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k