HardLabs

Ascom wireless flat panel

jlecomte·ascom-wireless-flat-panel·KiCad_Project/WirelessFlatPanel.kicad_pcb

Ascom wireless flat panel PCB layout, top view — open source Nordic nRF board by jlecomte
Simulate this board

About the Ascom wireless flat panel PCB

Ascom wireless flat panel is an open source Nordic nRF PCB design by jlecomte, published on GitHub under the MIT license. It is a 2-layer board measuring 66.5 × 51.3 mm, with 13 components from 6 distinct parts.

Its main chip is the Adafruit Feather nRF52840 Express, from the Nordic nRF family. By type, the board carries 6 resistors, 4 diodes, 1 module and 1 transistor.

It belongs with the iot & wireless and dev boards & breakouts designs in this gallery.

From the project

Open Source ASCOM-Compatible Wireless Flat Panel For Astrophotography

I do not charge anything to create and maintain these open-source projects. But if you would like to say "thanks" for this project, feel free to send any amount through Paypal using the button below. I appreciate your support!

Introduction Finished Product User Manual Pre-Requisites Hardware Bill Of Material ASCOM Driver + Downloading And Installing The Driver + Compiling The Driver (For Developers Only) Arduino Firmware + Microcontroller Compatibility + Compiling And Uploading The Firmware Electronic Circuit + Schematics + Breadboard Prototyping + PCB Mechanical Components And Assembly…

Ascom wireless flat panel, from the project README
From the project README

Main components on the Ascom wireless flat panel

Adafruit Feather nRF52840 Express

Ascom wireless flat panel bill of materials (BOM)

13 components, 6 distinct parts.

QtyPartRefs
1
Adafruit Feather nRF52840 Express
A1
1
Val**
Q1
1
10µF
10µF
4
LED
D1, D2, D3, D4
5
330Ω
R1, R2, R3, R4, R5
1
5KΩ
R6

Ascom wireless flat panel design files

The KiCad project lives in the jlecomte/ascom-wireless-flat-panel repository on GitHub; these links point at the commit this page was built from.

Ascom wireless flat panel: common questions

What microcontroller does the Ascom wireless flat panel use?

The Ascom wireless flat panel is built around the Adafruit Feather nRF52840 Express, from the Nordic nRF family.

How big is the Ascom wireless flat panel PCB?

The Ascom wireless flat panel measures 66.5 × 51.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ascom wireless flat panel?

13 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Ascom wireless flat panel design files?

From the jlecomte/ascom-wireless-flat-panel repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Ascom wireless flat panel design in my own project?

Yes, under the terms of its MIT license, which jlecomte chose for the repository.

Can I test firmware for the Ascom wireless flat panel without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

Similar boards