IBM-PC-Game-Control-Adapter and-RTC
jlprojects·IBM-PC-Game-Control-Adapter-and-RTC·IBM Game Controller/IBM Game Controller.kicad_pcb
About the IBM-PC-Game-Control-Adapter and-RTC PCB
IBM-PC-Game-Control-Adapter and-RTC is an open source PCB design by jlprojects, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 123.6 × 99.3 mm, with 39 components from 22 distinct parts.
Other key parts include the 74LS138, 74LS32, NE558N, 74LS244 and 74LS139. By type, the board carries 17 capacitors, 9 ICs, 4 resistors, 2 connectors, 1 crystal and 1 battery holder.
From the project
A combined Game Control Adapter and RTC clock for original IBM PC and XT originally designed for an IBM Portable PC 5155
A combined Game Control Adapter and RTC clock 8 bit ISA interface card for original IBM PC and XT. It was designed for an IBM Portable PC 5155 restored in the spring of 2025.
It is based on the original IBM PC Game Control Adapter - reverse engineered from photos of the original ISA card and the schematic in the IBM manual. The only changes made are to replace the original resistor networks with a more easily available one and some discrete resistors, and to add a second port to allow 2 joysticks to be used at the same time. In place of the protoyping area on the original PCB, I included a…

Main components on the IBM-PC-Game-Control-Adapter and-RTC
IBM-PC-Game-Control-Adapter and-RTC bill of materials (BOM)
39 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74LS138 | DIP-16_W7.62mm_Socket_LongPads | U1, U2 |
| 1 | 74LS32 | DIP-14_W7.62mm_Socket_LongPads | U3 |
| 1 | NE558N | DIP-16_W7.62mm_Socket_LongPads | U4 |
| 1 | 74LS244 | DIP-20_W7.62mm_Socket_LongPads | U5 |
| 1 | 74LS139 | DIP-16_W7.62mm_Socket_LongPads | U6 |
| 1 | 74LS688 | DIP-20_W7.62mm_Socket_LongPads | U7 |
| 1 | 74LS04 | DIP-14_W7.62mm_Socket_LongPads | U8 |
| 1 | BQ3285 bq3285 | DIP-24_W15.24mm_Socket | U9 |
| 1 | Crystal | Crystal_C38-LF_D3.0mm_L8.0mm_Horizontal | Y1 |
| 1 | IRQ | PinHeader_2x06_P2.54mm_Vertical | J3 |
| 1 | BUS_ISA_8BIT Bus_ISA_8bit | BUS_8_BIT_ISA | J4 |
| 1 | CR2032 | BatteryHolder_MYOUNG_BS-07-A1BJ001_CR2032 | BT1 |
| 1 | 600MA 600mA | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | F1 |
| 1 | CLR | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | 1K | R_Array_SIP9 | RP1 |
| 1 | 10K x 8 | R_Array_SIP9 | RP2 |
| 1 | RTC Address | SW_DIP_SPSTx08_Slide_9.78x22.5mm_W7.62mm_P2.54mm | SW1 |
| 7 | 0.1U 0.1u | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2, C3, C6, C15, C16, C17 |
| 5 | 10N 10n | C_Rect_L7.0mm_W2.5mm_P5.00mm | C4, C11, C12, C13, C14 |
| 1 | 10UF 10uF | CP_Radial_D6.3mm_P2.50mm | C5 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 47P 47p | C_Rect_L7.0mm_W2.5mm_P5.00mm | C7, C8, C9, C10 |
| 4 | 2.2K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R21, R22, R23, R24 |
IBM-PC-Game-Control-Adapter and-RTC design files
The KiCad project lives in the jlprojects/IBM-PC-Game-Control-Adapter-and-RTC repository on GitHub; these links point at the commit this page was built from.
IBM-PC-Game-Control-Adapter and-RTC: common questions
How big is the IBM-PC-Game-Control-Adapter and-RTC PCB?
The IBM-PC-Game-Control-Adapter and-RTC measures 123.6 × 99.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IBM-PC-Game-Control-Adapter and-RTC?
39 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the IBM-PC-Game-Control-Adapter and-RTC design files?
From the jlprojects/IBM-PC-Game-Control-Adapter-and-RTC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the IBM-PC-Game-Control-Adapter and-RTC design in my own project?
Yes, under the terms of its CC0-1.0 license, which jlprojects chose for the repository.