Solid Rocket Motor Test Station
jmh8231-Dev·ancp·Solid Rocket Motor Test Station - HW/ver 1.0/Solid Rocket Motor Test Station.kicad_pcb
About the Solid Rocket Motor Test Station PCB
Solid Rocket Motor Test Station is an open source STM32 PCB design by jmh8231-Dev, published on GitHub. It is a 6-layer board measuring 142.5 × 94.5 mm, with 234 components from 76 distinct parts.
Its main chip is the STM32H723VGT6, from the STM32 family. Other key parts include the LM2596S-3.3, 7.3728MHz, INA219BxD, 12MHz and FT232RL. By type, the board carries 94 capacitors, 71 resistors, 18 inductors, 16 ICs, 11 diodes and 9 connectors.
From the project
Solid Propellant Motor Document
- 안전 중심 점화 플로우 - 물리 IGN 스위치 감지 → 카운트다운 → 온도/추력 인터록 → 핫와이어 제어 - 모터/보드/PC 준비 상태 점검(미준비 시 시험 중지) - 정밀 계측 체인 - 로드셀(추력), 챔버 압력, 노즐/내부 온도(열전대), IMU 진동 - 메인/IGN 배터리 셀 별 전압 + 메인 배터리 전류(INA219) - 2″ LCD GUI (LVGL v9) - SPI DMA 플러시(논블로킹), SquareLine Studio 기반 화면 - Idle/Test/Config/Cal 페이지, FPS 확보 위해 라인 버퍼 + DMA 이중버퍼 - EEPROM 기반 설정/보정 - 32B 페이지 체크섬 저장 포맷(캘리브레이션 오프셋/설정값 무결성 보장) - PC/RF 텔레메트리 - 헤더·길이·페이로드·체크섬으로 구성된 패킷 전송 - RTOS 태스킹 - sensing / gui / comms / control / logging 분리

Main components on the Solid Rocket Motor Test Station
Solid Rocket Motor Test Station bill of materials (BOM)
234 components, 76 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM2596S-3.3 | TO-263-5_TabPin3 | U1 |
| 1 | 7.3728MHz | ASDMB-OSC | U2 |
| 1 | INA219BxD | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | STM32H723VGT6 | LQFP-100_14x14mm_P0.5mm | U4 |
| 1 | 12MHz | ECS-TXO-2016 | U5 |
| 1 | FT232RL | SSOP-28_5.3x10.2mm_P0.65mm | U6 |
| 1 | TVS | SOT-23-6 | U7 |
| 1 | LT3045xMSE | MSOP-12-1EP_3x4mm_P0.65mm_EP1.65x2.85mm | U10 |
| 1 | ADS1262IPW | TSSOP-28_4.4x9.7mm_P0.65mm | U11 |
| 1 | NCV8165 | DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U12 |
| 1 | ADUM4151 | SOIC-20W_7.5x12.8mm_P1.27mm | U13 |
| 1 | OPA189 | SOIC-8_3.9x4.9mm_P1.27mm | U14 |
| 2 | MCP6022 | SOIC-8_3.9x4.9mm_P1.27mm | U15, U16 |
| 1 | TC427 | SOIC-8_3.9x4.9mm_P1.27mm | U17 |
| 1 | ADR4525D | Analog_LCC-8_5x5mm_P1.27mm | U18 |
| 1 | IRF1404 | TO-263-2 | Q3 |
| 1 | 32.768kHz | XC32M4 | Y2 |
| 1 | ST-Link | IDC-Header_2x10_P2.54mm_Vertical | J1 |
| 1 | LCD | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | USB Type C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
Show 56 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Thrust | PinSocket_1x06_P2.54mm_Vertical | J8 |
| 1 | ChamberTemp | PinSocket_1x02_P2.54mm_Vertical | J9 |
| 1 | ChamberPressure | PinSocket_1x04_P2.54mm_Vertical | J10 |
| 1 | Main Balance Jack | FanPinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | IGN Balance Jack | FanPinHeader_1x03_P2.54mm_Vertical | J12 |
| 1 | NozzleTemp | PinSocket_1x02_P2.54mm_Vertical | J13 |
| 1 | Main BAT | AMASS_XT60-F_1x02_P7.20mm_Vertical | BT1 |
| 1 | IGN BAT | AMASS_XT60-F_1x02_P7.20mm_Vertical | BT2 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | AT24C08C | SOIC-8_3.9x4.9mm_P1.27mm | EEPROM1 |
| 4 | 10uH | L_CommonModeChoke_TDK_ACM2520-2P | FL1, FL2, FL3, FL4 |
| 1 | Igniter | AMASS_XT60-M_1x02_P7.20mm_Vertical | IGN1 |
| 1 | BNO085 | LGA-28_5.2x3.8mm_P0.5mm | IMU1 |
| 1 | IGN SW | SW_SMD_IT-1107 | SW1 |
| 1 | Main H7 Reset | SW_SMD_IT-1107 | SW2 |
| 1 | AS6221 | WLCSP-6_1.4x1.0mm_P0.4mm | Temp1 |
| 1 | SS54 | SS54 | D2 |
| 1 | Debug LED | LED_0805_2012Metric | D4 |
| 1 | Rx | LED_0805_2012Metric | D5 |
| 1 | Tx | LED_0805_2012Metric | D6 |
| 1 | Main Cell 1 | LED_0805_2012Metric | D7 |
| 1 | Main Cell 2 | LED_0805_2012Metric | D8 |
| 1 | IGN Cell 1 | LED_0805_2012Metric | D9 |
| 1 | IGN Cell 2 | LED_0805_2012Metric | D10 |
| 1 | 5VA | LED_0805_2012Metric | D12 |
| 1 | Digital 3.3V | LED_0805_2012Metric | D13 |
| 1 | 3.3VA | LED_0805_2012Metric | D14 |
| 16 | Bead | L_0805_2012Metric | FB1, FB3, FB4, FB5, FB7, FB8, FB9, FB12 +8 |
| 1 | Bead | L_12x12mm_H8mm | FB19 |
| 1 | 33uH | L_12x12mm_H8mm | L2 |
| 40 | 0.1uF | C_0805_2012Metric | C1, C2, C5, C9, C10, C13, C16, C17 +32 |
| 10 | 0.01uF | C_0805_2012Metric | C3, C7, C11, C25, C26, C30, C39, C46 +2 |
| 2 | 470uF | MVG25WV470M | C4, C8 |
| 8 | 10uF | C_1210_3225Metric | C6, C12, C27, C28, C54, C61, C64, C102 |
| 2 | 2.2uF | C_0805_2012Metric | C14, C15 |
| 2 | 4.7uF | C_0805_2012Metric | C34, C50 |
| 1 | 10uF | C_1206_3216Metric | C38 |
| 2 | 22pF | C_0805_2012Metric | C42, C43 |
| 9 | 1uF | C_0805_2012Metric | C47, C56, C58, C59, C60, C62, C65, C75 +1 |
| 1 | 22uF | C_0805_2012Metric | C52 |
| 1 | 4.7nF | C_0805_2012Metric | C72 |
| 8 | 47pF | C_0805_2012Metric | C76, C77, C83, C84, C86, C87, C97, C98 |
| 8 | 1nF | C_0805_2012Metric | C79, C80, C89, C90, C91, C92, C100, C101 |
| 2 | 0 | R_0805_2012Metric | R1, R3 |
| 1 | 0.1 | TO-126-2_Horizontal_TabDown | R2 |
| 11 | 10k | R_0805_2012Metric | R4, R15, R21, R22, R23, R25, R26, R27 +3 |
| 6 | 4.7k | R_0805_2012Metric | R5, R6, R7, R8, R9, R14 |
| 2 | 5.1k | R_0805_2012Metric | R10, R12 |
| 2 | 22 | R_0805_2012Metric | R11, R13 |
| 13 | 1k | R_0805_2012Metric | R16, R18, R19, R50, R57, R58, R59, R60 +5 |
| 8 | 47 | R_0805_2012Metric | R17, R20, R28, R29, R30, R31, R40, R41 |
| 1 | 49.9k | R_0805_2012Metric | R24 |
| 9 | 100 | R_0805_2012Metric | R32, R35, R36, R39, R42, R45, R66, R68 +1 |
| 8 | 10M | R_0805_2012Metric | R33, R34, R37, R38, R43, R44, R69, R70 |
| 4 | 50k | R_0805_2012Metric | R48, R51, R53, R55 |
| 4 | 100k | R_0805_2012Metric | R49, R52, R54, R56 |
Solid Rocket Motor Test Station design files
The KiCad project lives in the jmh8231-Dev/ancp repository on GitHub; these links point at the commit this page was built from.
Solid Rocket Motor Test Station: common questions
What microcontroller does the Solid Rocket Motor Test Station use?
The Solid Rocket Motor Test Station is built around the STM32H723VGT6, from the STM32 family.
How big is the Solid Rocket Motor Test Station PCB?
The Solid Rocket Motor Test Station measures 142.5 × 94.5 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Solid Rocket Motor Test Station?
234 components, from 76 distinct parts. The full bill of materials is listed on this page.
Where can I download the Solid Rocket Motor Test Station design files?
From the jmh8231-Dev/ancp repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Solid Rocket Motor Test Station design in my own project?
The repository has no license, so all rights stay with jmh8231-Dev. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Solid Rocket Motor Test Station without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in ancp
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k