22 open source boards using the MCP6022

Real designs built with the MCP6022, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

22 boardsClear filters|Most starred

How designs wire the MCP6022

Read from the KiCad layouts of 19 open source designs, one per repository: what each pin of the MCP6022 connects to, and the resistors, capacitors and other passives placed on it.

  • The V- pin is tied to GND on 19 of 19 designs.
  • The - pins have a series resistor on 14 of 19 designs, most often 100 kΩ (then 10 kΩ).
  • Pin 1 has a series resistor on 13 of 19 designs, most often 100 kΩ (then 100 Ω).
  • Pin 1 has a series capacitor on 11 of 19 designs, most often 100 pF (then 10 nF).
Pin 1Connected to: Signal 95%
  • Series resistor on 68% · 100 kΩ (4), 100 Ω (2), 10 kΩ (2)
  • Series capacitor on 58% · 100 pF (3), 10 nF (2), 47 pF (1)
-pin 2, 6Connected to: Signal 89%
  • Series resistor on 74% · 100 kΩ (10), 10 kΩ (6), 12.1 kΩ (4)
  • Series capacitor on 47% · 100 pF (3), 47 pF (2), 1 µF (2)
+pin 3, 5Connected to: Signal 82%
  • Resistor to GND on 58% · 100 kΩ (7), 10 kΩ (3), 51 kΩ (1)
  • Series resistor on 53% · 10 kΩ (4), 50 kΩ (3), 68 kΩ (2)
  • Capacitor to GND on 47% · 100 nF (4), 10 nF (3), 10 µF (2)
  • Pull-up to 3.3V on 37% · 100 kΩ (4), 10 kΩ (3), 51 kΩ (1)
V-pin 4Connected to: GND 100%
Pin 7Connected to: Signal 84%
  • Series resistor on 58% · 10 kΩ (5), 100 Ω (2), 31.6 kΩ (1)
  • Series capacitor on 42% · 100 nF (2), 47 pF (1), 100 pF (1)
V+pin 8Connected to: 5V 100%
  • Decoupling capacitor on 53% · 100 nF (11), 1 µF (1), 10 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Analog rev3 by PaulStoffregen, Space by ThisIsNotRocketScience, 4HPico by rheslip and Shape by andete.

The MCP6022 in open source designs

The gallery holds 22 open source boards using the MCP6022 from 19 GitHub repositories; a typical one measures about 95 × 83.3 mm and carries around 71 components.

76% are two-layer designs, the rest use four layers or more, and 32% carry an open source license.

The most starred is Analog rev3 by PaulStoffregen.

Parts used alongside the MCP6022

Microcontrollers on boards using the MCP6022

MCP6022: common questions

Where can I find a MCP6022 reference design?

Each of the 22 boards on this page is a real design using the MCP6022. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MCP6022 V- pin connected?

The V- pin is tied to GND on 19 of 19 designs. Counted from the KiCad layouts of 19 open source designs using the MCP6022.

What resistor goes on the MCP6022 - pin?

The - pins have a series resistor on 14 of 19 designs, most often 100 kΩ (then 10 kΩ). Counted from the KiCad layouts of 19 open source designs using the MCP6022.

What resistor goes on the MCP6022 pin 1?

Pin 1 has a series resistor on 13 of 19 designs, most often 100 kΩ (then 100 Ω). Counted from the KiCad layouts of 19 open source designs using the MCP6022.

What parts are used alongside the MCP6022?

The 74HC595, AMS1117-5.0 and MCP6002 appear in the most repositories here.

Which microcontrollers do boards using the MCP6022 use?

Most are built on AVR/Arduino (3), RP2040/RP2350 (3), STM32 (3) and ESP32 (1).

How big is a typical board using the MCP6022?

The median is 95 × 83.3 mm, and 76% are two-layer designs.

What is the most popular open source board using the MCP6022?

By GitHub stars, Analog rev3 by PaulStoffregen, with 160 stars.

Can I simulate one of these boards using the MCP6022 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part