11 open source boards using the 12MHz
Real designs built with the 12MHz, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ICE-V-Wireless
ICE-V-Wireless
81.7 × 31.8 mm78 parts4LMIT82ESP32
ESP32C3 FPGA
emeb
76.2 × 31.8 mm85 parts4LMIT16NXP
LPC4370-Oscillocope
BigLockie
85.3 × 40.5 mm117 parts4LNo license1STM32
ANCP Rocket Motor Test Station
jmh8231-Dev
155 × 100 mm281 parts6LNo license0RP2040/RP2350
Ultr4rick
kelu124
120 × 80 mm258 parts6LNo license0FPGA
ICEBreaker
frohro
73 × 37 mm133 parts4LNo license0ESP32
CybeSter
Srhurdirsati
80 × 115 mm38 parts2LNo license0- schematic only · 49 partsFPGA
Gate to glass
OoEthanoO
49 partsNo license0 STM32
Solid Rocket Motor Test Station
jmh8231-Dev
142.5 × 94.5 mm234 parts6LNo license0FPGA
ICEBreaker
m0-hassan
73 × 37 mm133 parts4LNo license0FPGA
Dspod up5k
emeb
26.4 × 41.7 mm63 parts4LMIT10
How designs wire the 12MHz
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the 12MHz connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 6 of 9 designs, most often 100 nF (then 4.7 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 3 | Connected to: The microcontroller 56% |
|
| VDDpin 4 | Connected to: 3.3V 67% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ICE-V-Wireless by ICE-V-Wireless, ESP32C3 FPGA by emeb, Dspod up5k by emeb and LPC4370-Oscillocope by BigLockie.
The 12MHz in open source designs
The gallery holds 11 open source boards using the 12MHz from 10 GitHub repositories; a typical one measures about 80.8 × 41.1 mm and carries around 117 components.
90% use four copper layers or more, and 27% carry an open source license.
The most starred is ICE-V-Wireless by ICE-V-Wireless.
Parts used alongside the 12MHz
Microcontrollers on boards using the 12MHz
What boards using the 12MHz are built for
12MHz: common questions
Where can I find a 12MHz reference design?
Each of the 11 boards on this page is a real design using the 12MHz. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 12MHz VDD pin?
The VDD pin has a decoupling capacitor on 6 of 9 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 9 open source designs using the 12MHz.
What parts are used alongside the 12MHz?
The ice5lp4k_sg48, 3.3V, MCP1824x-OT, XC6222B331MR-G and 1V2 appear in the most repositories here.
Which microcontrollers do boards using the 12MHz use?
Most are built on FPGA (4), ESP32 (3), STM32 (2) and NXP (1).
How big is a typical board using the 12MHz?
The median is 80.8 × 41.1 mm, and 10% are two-layer designs.
What is the most popular open source board using the 12MHz?
By GitHub stars, ICE-V-Wireless by ICE-V-Wireless, with 82 stars.
Can I simulate one of these boards using the 12MHz before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.