PS1-IGR JFT CTRLR Center
About the PS1-IGR JFT CTRLR Center PCB
PS1-IGR JFT CTRLR Center is an open source PIC PCB design by jnftech, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 17.5 × 11 mm, with 4 components from 4 distinct parts.
Its main chip is the PIC16F18325-IJQ, from the PIC family. By type, the board carries 1 IC, 1 connector, 1 test point and 1 capacitor.
From the project
One-wire QSBs using pyroesp's PS1 Reset Mod code
Main components on the PS1-IGR JFT CTRLR Center
PS1-IGR JFT CTRLR Center bill of materials (BOM)
4 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC16F18325-IJQ | UQFN-16-1EP_4x4mm_P0.65mm_EP2.6x2.6mm | U1 |
| 1 | PS1 Controller 1 (Solder Side) | PS1ctrlrRibbon_SolderSide_ForTHb | J1 |
| 1 | RST | Wirepad-2x2.5mm | TP7 |
| 1 | 0.1uF | R_0603_0.8mm | C1 |
PS1-IGR JFT CTRLR Center design files
The KiCad project lives in the jnftech/PS1-IGR-QSBs repository on GitHub; these links point at the commit this page was built from.
PS1-IGR JFT CTRLR Center: common questions
What microcontroller does the PS1-IGR JFT CTRLR Center use?
The PS1-IGR JFT CTRLR Center is built around the PIC16F18325-IJQ, from the PIC family.
How big is the PS1-IGR JFT CTRLR Center PCB?
The PS1-IGR JFT CTRLR Center measures 17.5 × 11 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PS1-IGR JFT CTRLR Center?
4 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the PS1-IGR JFT CTRLR Center design files?
From the jnftech/PS1-IGR-QSBs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PS1-IGR JFT CTRLR Center design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which jnftech chose for the repository.
Can I test firmware for the PS1-IGR JFT CTRLR Center without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in PS1-IGR-QSBs
Similar boards
PICPslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7k
PICMicro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414
PICGB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0376
PICGB-MBCTEST
51.4 × 61 mm32 parts2LCC-BY-4.0376
PICGB-BENCH-G1
100 × 100 mm98 parts4LCC-BY-4.0376
PICGB-LIVE32
51.4 × 61 mm46 parts4LCC-BY-4.0376