PS1-IGR JFT PSone
jnftech·PS1-IGR-QSBs·Kicad Projects/PS1 IGR pyroesp JFT PSone UQFN/PS1-IGR JFT PSone.kicad_pcb
About the PS1-IGR JFT PSone PCB
PS1-IGR JFT PSone is an open source PIC PCB design by jnftech, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 28 × 7 mm, with 4 components from 4 distinct parts.
Its main chip is the PIC16F18325-IJQ, from the PIC family. By type, the board carries 1 IC, 1 connector, 1 test point and 1 capacitor.
From the project
One-wire QSBs using pyroesp's PS1 Reset Mod code
Main components on the PS1-IGR JFT PSone
PS1-IGR JFT PSone bill of materials (BOM)
4 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC16F18325-IJQ | UQFN-16-1EP_4x4mm_P0.65mm_EP2.6x2.6mm | U1 |
| 1 | PS1 Controller 1 (Solder Side) | PS1ControllerPort_SolderSide_1gnd0hv | J1 |
| 1 | — | Wirepad-2.54mm | TP7 |
| 1 | 0.1uF | R_0603_0.8mm | C1 |
PS1-IGR JFT PSone design files
The KiCad project lives in the jnftech/PS1-IGR-QSBs repository on GitHub; these links point at the commit this page was built from.
PS1-IGR JFT PSone: common questions
What microcontroller does the PS1-IGR JFT PSone use?
The PS1-IGR JFT PSone is built around the PIC16F18325-IJQ, from the PIC family.
How big is the PS1-IGR JFT PSone PCB?
The PS1-IGR JFT PSone measures 28 × 7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PS1-IGR JFT PSone?
4 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the PS1-IGR JFT PSone design files?
From the jnftech/PS1-IGR-QSBs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PS1-IGR JFT PSone design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which jnftech chose for the repository.
Can I test firmware for the PS1-IGR JFT PSone without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in PS1-IGR-QSBs
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0376PIC
GB-MBCTEST
Gekkio
51.4 × 61 mm32 parts2LCC-BY-4.0376PIC
GB-BENCH-G1
Gekkio
100 × 100 mm98 parts4LCC-BY-4.0376PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0376