HardLabs

Raspberry pi nas filesystem

jnwajei22·raspberry-pi-nas-filesystem·hardware/pcb/kicad/raspberry_pi_nas_nvme.kicad_sch

This repository ships a schematic but no board layout.

About the Raspberry pi nas filesystem PCB

Raspberry pi nas filesystem is an open source Raspberry Pi PCB design by jnwajei22, published on GitHub. It is a board, with 49 components from 29 distinct parts.

Its main chip is the JMS583-QHFA0A, from the Raspberry Pi family. Other key parts include the TPD4E05U06DQAR, W25Q16JVSNIQ TR and TPS54302DDCR. By type, the board carries 26 capacitors, 10 resistors, 6 ICs, 3 connectors, 2 inductors and 1 crystal.

From the project

A custom Raspberry Pi 4-based network attached storage system built around a 3D-printed enclosure, a custom USB-to-NVMe carrier PCB, and 4 TB of M.2 NVMe storage.

A custom Raspberry Pi 4-based network attached storage system built around a 3D-printed enclosure, a custom USB-to-NVMe carrier PCB, and 4 TB of M.2 NVMe storage.

The goal of this project is to build a compact personal file server from the enclosure up rather than relying on a prebuilt NAS chassis or external SSD enclosure.

- Raspberry Pi 4B-based NAS - 4 TB M.2 2280 NVMe storage - Custom 90 × 90 mm USB-to-NVMe carrier PCB - USB 3.x connection between the Raspberry Pi and storage board - Custom 3D-printed enclosure - Internal mounting system for the Raspberry Pi, storage board, and cooling…

Main components on the Raspberry pi nas filesystem

JMS583-QHFA0ATPD4E05U06DQARW25Q16JVSNIQ TRTPS54302DDCR

Raspberry pi nas filesystem bill of materials (BOM)

49 components, 29 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
JMS583-QHFA0A
U1
3
TPD4E05U06DQAR
U2, U3, U4
1
W25Q16JVSNIQ TR
U6
1
TPS54302DDCR
U7
1
ABM8-25.000MHZ-B2-T
Y1
1
2024100002
J1
1
AUX5V INPUT — CONNECTOR TBD
J2
1
1-2199230-6
J3
1
ACTIVITY GREEN
D1
1
4.7uH
L1
1
6.8uH / >=3A
L2
9
100nF
C1, C2, C3, C4, C5, C8, C16, C18 +1
2
1uF
C6, C9
2
4.7uF
C7, C10
4
220nF
C11, C12, C13, C14
1
10uF
C15
1
47uF
C17
1
47pF
C19
2
22uF
C20, C21
1
100uF
C22
Show 9 more
QtyPartRefs
2
30pF C0G 5%
C24, C25
1
1uF X7R 10%
C26
1
12k 1%
R1
1
330k 1%
R2
1
1k
R3
2
10k
R4, R5
3
100k 1%
R6, R9, R10
1
22.1k 1%
R7
1
510k
R8

Raspberry pi nas filesystem design files

The KiCad project lives in the jnwajei22/raspberry-pi-nas-filesystem repository on GitHub; these links point at the commit this page was built from.

Raspberry pi nas filesystem: common questions

What microcontroller does the Raspberry pi nas filesystem use?

The Raspberry pi nas filesystem is built around the JMS583-QHFA0A, from the Raspberry Pi family.

How many components are on the Raspberry pi nas filesystem?

49 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Raspberry pi nas filesystem design files?

From the jnwajei22/raspberry-pi-nas-filesystem repository on GitHub, which has the schematic, a netlist and the BOM; the links under Design files point to each one.

Can I use the Raspberry pi nas filesystem design in my own project?

The repository has no license, so all rights stay with jnwajei22. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Raspberry pi nas filesystem without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards