TorqController
JoaoWMHentz·Kinematech_Torq·TorqController/TorqController/TorqController.kicad_pcb
About the TorqController PCB
TorqController is an open source STM32 PCB design by JoaoWMHentz, published on GitHub. It is a 2-layer board measuring 58.5 × 43.1 mm, with 129 components from 48 distinct parts.
Its main chip is the STM32G473CBTx, from the STM32 family. Other key parts include the INA240A2PW, UCC27211D, LM5161PWP, MCP16311x-xMS and AMS1117. By type, the board carries 51 capacitors, 46 resistors, 12 ICs, 12 connectors, 3 inductors and 2 transistors.
Main components on the TorqController
TorqController bill of materials (BOM)
129 components, 48 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | INA240A2PW | TSSOP-8_4.4x3mm_P0.65mm | U1, U6, U9 |
| 3 | UCC27211D | HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm_ThermalVias | U2, U3, U4 |
| 1 | STM32G473CBTx | LQFP-48_7x7mm_P0.5mm | U5 |
| 1 | LM5161PWP | Texas_HTSSOP-14-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask3.155x3.255mm_ThermalVias | U7 |
| 1 | MCP16311x-xMS | MSOP-8_3x3mm_P0.65mm | U8 |
| 1 | AMS1117 | SOT-223-3_TabPin2 | U10 |
| 1 | TJA1051TK-3 | HVSON-8-1EP_3x3mm_P0.65mm_EP1.6x2.4mm | U11 |
| 1 | 40106 | SOIC-14_3.9x8.7mm_P1.27mm | U13 |
| 2 | AO3400A | SOT-23 | Q1, Q2 |
| 1 | 24 mhz XTAL 3225 | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | Con_Temp | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | Con_I2C | JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | Con_Prog | JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | Conn_01x08_Pin | JST_EH_B8B-EH-A_1x08_P2.50mm_Vertical | J4 |
| 1 | Conn_01x06_Pin | JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical | J5 |
| 3 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J6, J7, J12 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J8 |
| 2 | Con_Fan | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J9, J10 |
| 1 | USB_C_Plug_USB2.0 | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | P1 |
| 1 | RESET | SW_SPST_B3U-1000P | SW1 |
Show 28 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ASMB-MTB1-0A3A2 | LED_Avago_PLCC4_3.2x2.8mm_CW | D1 |
| 1 | 120r 100mhz | L_0402_1005Metric | FB1 |
| 1 | 100uH | L_KOHERelec_MDA5030 | L1 |
| 1 | 22uH | L_Chilisin_BMRB00050518-B | L2 |
| 9 | 100nf | C_0402_1005Metric | C1, C8, C29, C35, C36, C37, C41, C45 +1 |
| 13 | 100n | C_0402_1005Metric | C2, C3, C4, C5, C9, C10, C12, C13 +5 |
| 1 | 4u7 | C_0402_1005Metric | C6 |
| 2 | 1u | C_0402_1005Metric | C7, C11 |
| 2 | 10pf | C_0402_1005Metric | C14, C15 |
| 3 | 100uF | CP_Elec_3x5.4 | C16, C38, C42 |
| 5 | 4,7uF | CP_EIA-3216-10_Kemet-I | C22, C25, C27, C43, C44 |
| 3 | 0,470uF | CP_EIA-3216-10_Kemet-I | C23, C24, C26 |
| 3 | 2,2uf | C_0402_1005Metric | C28, C30, C34 |
| 1 | 10n | C_0402_1005Metric | C32 |
| 2 | 2.2uf | C_0603_1608Metric | C33, C39 |
| 4 | C | C_0402_1005Metric | C47, C49, C51, C53 |
| 3 | 4.7pf | C_0402_1005Metric | C56, C57, C58 |
| 21 | 10k | R_0402_1005Metric | R1, R2, R3, R8, R9, R12, R13, R18 +13 |
| 6 | 100R | R_0402_1005Metric | R4, R5, R6, R7, R10, R11 |
| 3 | 1k | R_0402_1005Metric | R14, R15, R87 |
| 1 | 402k | R_0402_1005Metric | R16 |
| 3 | 2K2 | R_0402_1005Metric | R17, R34, R35 |
| 1 | 52.3k | R_0402_1005Metric | R19 |
| 2 | 22R | R_0402_1005Metric | R21, R22 |
| 1 | 220R | R_0402_1005Metric | R23 |
| 4 | 330K | R_0402_1005Metric | R24, R28, R30, R32 |
| 3 | 4.7K | R_0402_1005Metric | R37, R38, R39 |
| 1 | 100R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R58 |
TorqController design files
The KiCad project lives in the JoaoWMHentz/Kinematech_Torq repository on GitHub; these links point at the commit this page was built from.
TorqController: common questions
What microcontroller does the TorqController use?
The TorqController is built around the STM32G473CBTx, from the STM32 family.
How big is the TorqController PCB?
The TorqController measures 58.5 × 43.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TorqController?
129 components, from 48 distinct parts. The full bill of materials is listed on this page.
Where can I download the TorqController design files?
From the JoaoWMHentz/Kinematech_Torq repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the TorqController design in my own project?
The repository has no license, so all rights stay with JoaoWMHentz. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TorqController without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Kinematech_Torq
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k